Product Data Sheet; Product Description - ChiliTec 21521 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Item no .: 21251 (white) - 23135 (silver)
Flush-mounted PIR motion detector 160 °

Product description:

This convenient motion detector directly replaces an ON / OFF switch (not suitable for
two-way switching!) Starts from 1 watt - also ideal for LEDs!
Technical details:
• On-Off-PIR switch • IP20, only for indoor use
• Adjustable twilight switching threshold
• Switching time 10 sec. - 7 min
• 230V ~ / 50Hz • Detection angle 160 °
• Range max 9m
Installation dimensions WxHxD 49x49x30mm
Suitable for flush-type boxes Ø60mm and cavity wall boxes Ø68mm
Decorative panel HxW 80x80mm
• Insert HxW 50x50mm
• Installation height 100-180cm
• Power range 1-500W for ohmic loads such as
incandescent lamps, 1-200W for inductive loads such
as LED lamps or fluorescent tubes
Own consumption standby 0.1W, during operation 0.45W
Safety instructions and important information!
In order to guarantee safety at all times and to use the full range of functions of the device, please
read the safety instructions carefully and carefully!
The product must not be modified technically or mechanically, otherwise
The operating license and the conformity expire with immediate effect !! The nameplate /
imprint must not be removed under any circumstances! Check the product for damage before
each use. If the product is damaged, it must be checked, repaired or replaced by a specialist
company and disposed of in accordance with the applicable guidelines (see footer on page 1).
Under no circumstances may a damaged or defective product continue to be used! Please be
sure to secure all packaging material and accessories, especially small parts such as screws and
foils, from children and animals. Danger of suffocation! The manufacturer assumes no liability
for damage to property or personal injury in the event of non-compliance with the instructions
or improper use, misuse or changes made to the product. The product must never be covered
during operation! This product must never be operated, kept, put down or stored in the access
area of children or animals. Keep these instructions in a safe place. If this product is passed on,
the instructions and the packaging must be included. Thanks! We reserve the right to make
misprints or changes to packaging, the product or the instructions.
The translations in EN/FR/ES/IT were created automatically,
we assume no liability for this or guarantee of correctness.
Electronic products that are marked with the crossed-out garbage can do not belong in the household waste! You can hand these
products over to the municipal collection points free of charge. Inquire at your local authority, the responsible town hall or a local or
municipal waste disposal company. Many Thanks. Used batteries should not be put in the household garbage. Consumers are legally
obliged to bring batteries to a suitable collection point at the trade or municipality. Old batteries may contain pollutants or heavy
metals that can damage the environment and health. The symbols under the label (garbage can) stand for:
Pb: battery contains lead, Cd: battery contains cadmium Hg: battery contains mercury. The environment and ChiliTec say thank you.
Reproduction only with permission from ChiliTec GmbH, teaching
operation manual
- Product data sheet Page 1/3 -
EAR (WEEE): DE25841852
LUCID Packaging Act: DE5562476395648
GRS (UBA register) No .: 21003466
Status: 01/2020 - Ver. 1.02

Publicidad

Tabla de contenido
loading

Productos relacionados para ChiliTec 21521

Este manual también es adecuado para:

23135

Tabla de contenido