Buffalo HD-PZU3 Manual Del Usuario página 5

● If you use this unit with multiple partitions, format each partition before use.
● When Mac OS is booted while the MiniStation is connected, the computer may not recognize
it. If this happens, unplug the USB cable for a few seconds and then plug it in again.
● Some computers may not boot Windows while this unit is connected. If this happens, leave the
MiniStation disconnected until after the computer has booted. Consult your computer's manual
for instructions on changing the BIOS settings to boot from an internal hard drive if you want to be
able to turn on or off your computer while this unit is connected.
● The MiniStation supports hot-plugging. You can plug or unplug the USB cable while the
MiniStation and your PC are on. However, never unplug the cable while the Power/Access/
Lock LED is blinking, as data is being accessed. If you unplug the MiniStation while the Power/
Access/Lock LED is blinking, your data may be damaged or lost.
● Refer to the manuals for your computer and peripheral devices.
● Do not boot your operating system from the MiniStation.
● Do not lean any object against this unit. It may cause the unit to malfunction.
● If the MiniStation is connected to a USB 2.0 / 1.1 plug, Windows will display a message that a
high-speed USB device is connected to a non high-speed USB hub. Move the MiniStation to a
USB 3.0 port for best performance, or click [X] to continue.
● You may hear some noise while the MiniStation is working, especially while it's booting or
being accessed. This is normal.
● After installing the driver for the MiniStation, several devices are added to Device Manager.
Display [Device Manager] by following the instructions below:
Windows 7/Vista .........................Click [Start], right-click [Computer], and click [Manage]. When "A program
Windows XP ...............................Click [Start] and right-click [My Computer].
Device
Universal Serial Bus
controllers
Disk drives
DVD/CD-ROM Drive
4
HD-PZU3 User Manual
needs your permission to continue" is displayed, click [Continue] and
click [Device Manager].
Click [Manage] and then [Device Manager].
Device Name in Device Manager
USB Mass Storage Device
BUFFALO HD-PZU3 USB Device
BUFFALO Virtual Cdrom USB Device