Manual Operation - Kenwood EW7507EBK Instrucciones Para El Uso

2) MANUAL OPERATION

To operate the appliance in "manual" mode, press the "ON MODE" button.
To set the required power level: press the "ON MODE" button, and then press again one or
more times within 5 seconds to select the power level, as per the following sequence:
At any time during "Manual" operation, pressing the "ON MODE" button once will display
the previously set power level for 5 seconds; after this 5 second period, the display will
return to show the current operating power.
If Maximum power has been selected, adjust the " +" or "
temperature, from 42 to 95°F (5 to 35°C). By pushing once the " +" or " -" button the
desired temperature (shown on the right side of the display) will increase or decrease by1°F.
Press and hold the button to move through the temperature mode quickly.
correct time
ELECTRONIC CLIMATE CONTROL
This heater has Electronic Climate Control which automatically monitors and selects
the ideal power setting to maintain your chosen temperature.
If the selected temperature is higher than the actual room temperature, the appliance
will start automatically and rapidly heat the room until it reaches the selected tempe-
rature. The unit will automatically maintain the temperature at a constant level, by
switching between maximum, medium, minimum power and OFF.
If medium power level has been selected using the "ON MODE" button, the
appliance will cycle between medium, minimum power and OFF to maintain a selec-
ted temperature.
ANTI-FREEZE SETTING
Press the "ON MODE" button and select the maximum power level. Set the tempera-
ture to 42°F with the "
4
Maximum power
Medium power
Minimum power
AM MAN
-" button. When set in this way, the appliance will turn on
Off
-" button to the desired comfort
set temperature
° F
AM MAN
° F
AM MAN
° F
AM MAN
° F ° F
AM MAN
° F
0