Enders NELSON Manual De Montaje Y Uso página 15

NELSON
DECOMMISIONING
1. Turn the control knob "•" (OFF).
2. Press the cartridge stop lever (6) to "
also immediately move the lever to the "
3. Remove the cartridge from the cartridge slot after every use.
4. Place the red protective cap onto the cartridge and store it in a well-ventilated and
cool place.
CHANGING THE GAS CARTRIDGE
1. Close the gas flow by turning the control knob (8) clockwise to "•" (OFF).
2. When the burner goes off, move the cartridge stop lever (6) to "
3. Open the cartridge slot (2), lift up the end of the cartridge and remove it.
CAUTION!
Before inserting a new cartridge, please check/ensure that there is a seal
on the inside of the appliance valve (9) and that it is in good condition.
" (OPENED). In case of emergency, you can
" (OPENED) position.
15
1880
" (OPENED).