MAINTENANCE & CARE INFORMATION
Congratulations and high five on successfully assembling your new Skywalker Sports Swivel Teeter Totter! Now, the
best way to keep your new teeter totter in tip top shape, is to follow this checklist periodically:
1. Tighten all hardware at the beginning of each play season.
2. Check metal parts for rust. If found, sand and repaint using a nonlead-based paint.
3. Spot clean frame when dirt accumulates.
4. Disposal Instructions: If discarding, disassemble and dispose of the teeter totter in such a
way that no unreasonable hazards will exist at the time the teeter totter is discarded.
Don't forget to check us out online! We'd love to hear from you.
Website: skywalkertrampolines.com
Facebook: facebook.com/skywalkertrampolines
YouTube: youtube.com/channel/UCUty7EqwIGouK5ovzGpHGrw/feed
Pinterest: pinterest.com/swtrampolines
Twitter: twitter.com/swtrampolines?lang=en
Instagram: instagram.com/skywalker_trampolines/?hl=en
INSTRUCTIONS FOR USE
To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual
before you use this equipment. Warnings and instructions for care, maintenance, and use of this teeter totter are
included to promote safe enjoyable use of this equipment.
1.
It is the responsibility of the owner and supervisors
of the teeter totter to make sure all users obey
the safety instructions given in this manual. This
teeter totter should only be used with mature,
knowledgeable supervision.
2. Be sure that Teeter Totter is on a level surface,
not less than 6 ft (1.8m) from any structure or
obstruction such as a fence, garage, house,
overhanging branches, laundry lines, or electrical
wires.
3. Do not let children use equipment until properly
assembled. Always inspect the teeter totter
before it is used and replace any worn, defective,
or missing parts. (Users may be hurt if the teeter
Totter is used when it is in poor condition.) Do not
install over concrete, asphalt, packed earth, grass,
carpet, or any other hard surface.
4. Never set-up the teeter totter in heavy rain, wind, or
storm conditions.
5. When moving the assembled teeter totter, have at
least two people evenly hold the frame to lift the
teeter totter off the ground.
6. The following conditions could present potential
hazards: a bent or broken frame or support system,
sharp protrusions on the frame or suspension, and
loosened or missing hardware.
7.
Dress children with well-fitting and full-foot
enclosing footwear. Examples of inappropriate
footwear are clogs, flip flops, and sandals.
8. Instruct children not to walk close to, in front of,
behind, or between moving items. Instruct children
to keep a safe distance away to keep from being
struck by items in play.
9. Instruct children not to use the equipment in any
manner other than intended.
10. Instruct children not to get off equipment while it is
in motion. Do not allow children to jump from moving
play items.
11.
Dress children in comfortable clothing free of hooks,
snaps, drawstrings or anything which may snag or
catch in the teeter totter.
12. On-site adult supervision for children of all ages at
all times is required.
13. To reduce risk of entanglement, keep small children
away from the teeter totter area at all times.
14. Never let children climb on the teeter totter as this
can result in the teeter totter falling over causing
serious injury or death.
15. The metal frame of the teeter totter will conduct
electricity. Lights, extension cords, and all such
electrical equipment must never be allowed to
come in contact with the teeter totter.
16. Inspect the teeter totter before each use. Make sure
all parts are correctly and securely positioned and
attached. Tighten any loose hardware and replace
any worn, defective, or missing parts.
10