MBO Merkura 1050 Instrucciones Para El Servicio página 39

Merkura 1050 GB neu
USING THE PULSE COMPUTER
Activating/
deactivating
the training
zone alarm
Z
O
N
E
C
MHR alarm
Warning
27.03.2003
All manuals and user guides at all-guides.com
In pulse mode, keep pressing key "B" until the
letters ZN are displayed in the centre line of the
display. The current training zone is now dis-
played in the bottom line with the upper and
lower limits.
Press key "C" to switch the alarm on or off for
the relevant training zone. If the training zone
alarm is activated, the alarm icon
the display. The pulse computer will now let you
know:
• when your pulse rate falls below the preset
training zone by beeping once a second.
• when your pulse rate is above the preset
B
training zone by beeping twice a second.
• when your current pulse rate is 99% or more
of your MHR by beeping four times a second.
In order to minimise the risk of injury, if your
pulse rate reaches 99% of your maximum heart
rate (MHR) – or exceeds it – a warning tone
sounds (4 beeps per second).
If the alarm is not enabled (no alarm icon dis-
!
played), only a visual warning occurs (% of MHR
blinks). There is no audible warning if the MHR
is exceeded!
8:31 Uhr Seite 15
www.MBOservice.net
15
appears in