Sebson AC OUT 3R1S Manual Del Usuario página 7

General safety information:
Danger:
In case of damages or contact with water turn off this product immediately without tension and make sure
that a restart is no longer possible!
Danger of suffocation:
parts that can be swallowed!
Caution:
Avoid overloading the device, an overload can damage the device or cause a short circuit! Therefore,
please note the maximum power consumption in the technical data!

The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer
be guaranteed if it is modified! In addition, this will invalidate the warranty claim!

The manufacture does not accept any responsibility for injuries or damage resulting from improper use of
this product!

Any other use than the description may result in damage to the product. So the dangers are such as
electric shock, short circuit, fire etc.

We reserve the right to make changes to the product, the packaging or the operating instructions as well as
printing errors.

This product is suited for indoor- and outdoor-use.

Protect the product from external damage, heavy dirt, moisture and excessive heat!

In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!

In commercial institutions, the accident prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to.
General information about the product (Fig.2):
1: Control light
2: 4 Switches for "ON"
3: 4 Switches for "OFF"
4: ON/OFF button
Start up (Fig.3):
Danger:
Do not close several switches consecutively! Danger of overheating!
Attention:
Take the product out of the socket if you do not use the product for an extended period of time!

Please observe the safety instructions and technical data before installing this product!

Operate this product at a suitable power outlet (230V AC 50Hz).
Activate and de-activation of the wireless socket-outlet:
Connect Wireless socket-outlet with remote-controller:
For this press and hold the learning switch (Item 4) for 3 sec. (by pressing and releasing you hear a click). After
that, the LED begins to flash and is now in connection mode. (The LED may only flash after releasing the learning
switch. If the LED already flashing during the pressure, the wireless socket-outlet is not in connect mode)Take now
the remote controller and press one of four left keys (see Item 2) which you want to assign to this wireless socket-
outlet. The wireless outlet-socket is connected now with the selected letter. For the connection of the remaining
wireless socket-outlets repeat the connection process for each wireless socket-outlet. You can assign each wireless
socket-outlet a private letter, but also several wireless socket-outlet the same letter.
Activation and de-activation WITH remote controller:
After the wireless socket-outlet are connected with the remote controller, you can activated by pressure of the
respective desired letter in the "ON" series (controlling light of the activated wireless socket-outlet shines
Please keep this product away from children and animals. The packaging contains small
7