Instructions For Cleaning - Hamilton Beach BCR100 Manual Del Usario

Instructions for Cleaning

External
1. Shut off water and disconnect the water hose from the
water supply.
2. Pull rinser away from sink bottom to release suction cups.
3. Wash rinser in sink with warm, soapy water.
4. Rinse with clean water and dry completely.
5. Replace rinser in the sink. Ensure suction cups adhere
rinser to bottom of sink; then reattach water hose to the
water supply.
Internal
1. Follow Steps 1 and 2 from above.
2. Unscrew spray nozzle from base. Gently separate rinser
base and remove spring. (Be careful not to lose spring.)
3. Soak rinser components in warm, soapy water.
4. Rinse with clean water and dry completely.
5. To reassemble rinser: Slide spring over post and place
rinser top over post. Press down on rinser top to
expose threads of post. Hand-tighten spray nozzle
onto post.
6. Place rinser in sink, moving and pressing to ensure
suction cups are stuck to sink. Attach water hose to
water supply.
840221200 ENv04.indd 6 840221200 ENv04.indd 6
6
11/12/12 8:57 AM 11/12/12 8:57 AM