Ace AC-6507 Manual De Instrucciones página 2

THIS END UP
1 2 3 4 5 6
MIN
Figure 3
1. The transmitter can be oriented horizontally or vertically. However, in most cases
experimenting with mounting positions is needed.
2. Test Range. Temporarily position chime and transmitter where you want them
mounted. Press test button on transmitter to verify chime is working properly.
See Troubleshooting section if chime does not sound.
Microphone Wire
Terminals
Wire Routing
Slot
Microphone
3. With the Extension Transmitter still in the intended location, activate the exist-
ing door chime. If the weatherproof chime sounds, proceed to step 6. If it does
not sound, try different positions for the extension transmitter, or increase the
microphone sensitivity (Figure 5) by turning the Microphone Sensitivity Adjust-
ment clockwise. In some instances, it may be necessary to take the removable
microphone out of the transmitter case, and mount it directly on the existing
All manuals and user guides at all-guides.com
Jumpers
MAX
Battery
Orientation
2.
Install Extension Transmitter.
Extension
Transmitter
Figure 5
-2-
Keyholes
THIS END UP
2.0"
1 2 3 4 5 6 7 8
MIN MAX
TYPE TYPE
TYPE
"D" "D"
"D"
Figure 4
Microphone Sensitivity
Adjustment
Test Button
Transmit
Light
Existing
Doorbell
598-1150-01
Volume
Control