Chapter 4; Description - B.A. International ULTIseal BASE740 Manual Del Usuario

ULTIseal BASE740 is the newest electronic thermosealing machine from B.A International, with a
continuous cycle and constant temperature.
ULTIseal BASE740 is a machine with a modern, innovative and ergonomic design, easy to use and to
clean, with rounded contours and fitted with a roll holder which has an overall dimension that measures the
length of the machine. The sterilisation rolls of paper/polypropylene are positioned inside the machine. The
new applied technology minimises the energy consumption by creating shorter sealing times and eliminating
the need of cooling times between every use. It also increases the reliability of the machine, excluding the
periodical servicing and repairs. ULTIseal BASE740 is built in accordance with the quality standards set by
the European Community.
Supply voltage
Number of phases
Supply frequency
Power input
Isolation class
Fuses
Range of environmental
conditions in which the unit was
designed to operate
Switch
Weight of the machine
Sealing band
Type of sealing
Sealing area width
Power unit
Roll hanger
Cooling time
Positioning of the tape during the
sealing
Cutting edge
Sealing lever
Design
Colour
Routine maintenance

CHAPTER 4

4.1 – DESCRIPTION
CHARACTERISTIC OF THE THERMOSEALER
230 V
1
50/60 Hz
100 W
1/ IPX0
N° 2 – 5 x 20 – T5 A 250V
- Indoor use
- Altitude up to 2000 m
- Temperature: +5 ÷ +40°C
- Max relative humidity 85%
- Max variation in mains voltage: ±10%
- Installation category (overvoltage category) II
- Pollution level 2
Single-pole
7.6 kg
12 mm
constant temperature
310 mm.
unique and autonomous, available for use with 220V which is not
subject to short circuiting. It is easy to have repaired (in the rare case
of breakage), and is built in compliance with EC safety standards.
has a hidden support
not needed, between one sealing
and another
During the sealing there is no
difference between
placing the sealing tape with the
film above or below
practical, safe, functional and
easy to use
ergonomic, handle with a light and
delicate movement
ergonomic and rounded
RAL 9036, powder painted
not necessary
9
ULTIseal BASE740_EN Rev 2021/01