IKEA DÅNDIMPEN Manual De Instrucciones página 6

Factory Reset
Long press 10 sec to factory reset.
Charging
• When battery is low the battery symbol will light up. Connect a power
supply to the USB-C connector (2). For charging, use only Ni-MH type
AA rechargeable batteries.
• Do not attempt to charge other types such as Alkaline, Carbon Zink
etc. The clock radio has built in protection and will detect wrong
battery types. The battery symbol (3) will indicate error by flashing.
Recommended power supply:
5.0Vdc, min 2.0A (Not included)
Recommended battery types:
3 x IKEA LADDA 2450 (AA, 1.2V, 2450mAh, Ni-MH) (Not included)
Do not mix batteries of different capacities, types or date stamps.
TECHNICAL DATA
Model name: DÅNDIMPEN
Type nr: E1802
Input: 5.0V DC, 1.0A or 3xAA
Estimated battery play time at
50% Volume and Bluetooth mode:
-50% display brightness: 10h
Operating Temperatures: 0°C to 45°C
Operating humidity: 0 to 95%RH
Operating Frequency: 2.4-2.48GHz
Radio Output Power: 3 dBm (EIRP)
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
WARNING:
• Never install the product in a confined space. Always leave a space of
at least 5 mm around the product for ventilation.
• Product and Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or similar.
• No naked flame sources, such as candle lights should be placed on the
apparatus.
6