Troubleshooting - Oregon Scientific CU600 Manual De Instrucciones Original

Troubleshooting

Use this table to see possible solutions for problems with the cultivator If these suggestions do not
solve the problem, see "Warranty and Service"
SYMPTOM
Cultivator vibrates
excessively during
use
The cultivator does
not cut properly
18
Troubleshooting
POSSIBLE CAUSE
Tines are damaged
Tines are not attached
properly
The tines are dull
RECOMMENDED ACTIONS
Replace with new Oregon tines
Remove the tines and reinstall See "Replacing the
Tines"
Sharpen the tines or contact your local Oregon
representative
CU600 Multi-attachment