Goobay 51778 Manual De Instrucciones página 2

EN User Manual
USB-C™ Card Reader
1 Safety Instructions
• Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct
use.
• Keep this user manual.
It must be available for uncertainties and passing the product.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connections and circuits.
• Use product, product parts and accessories only in perfect
condition.
• In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentation,
contact your dealer or producer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against acciden-
tal use.
• Avoid stresses such as heat and cold, moisture and direct
sunlight, microwaves, vibrations and mechanical pressure.
2 Description and Function
2.1 USB-C™ Card Reader
The USB-C™ Card Reader is designed for reading microSD and
SD memory cards.
• fast data transfer thanks to SuperSpeed USB 3.0 connection
• USB Type-C™ connection with USB 2.0 Hi-Speed data transfer
• LED indicates the operating status of the card reader
• supports Plug & Play
2.2 Scope of delivery
USB-C™ Card Reader, User manual
2.3 Operating elements
1 USB-C™ 2.0 plug 2
3 SD socket 4
2.4 Specifications
Article number
Connections
Input voltage
Data transmission rate
Compatible with
Dimensions (mm)
Weight (g)
Tab.: Specifications
3 Intended Use
We do not permit using the device in other ways like described in chapter
„Description and Function" or in the „Safety Instructions". Use the product
only in dry interior rooms. Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and damages to
persons and property.
4 Preparing
• Compare the specifications of all used devices to ensure
compatibility.
• Check the scope of delivery for completeness and integrity.
5 Connecting
1. Insert the card reader into a USB socket of your PC or notebook.
Wait until the device is recognized.
2. Insert a suitable memory card into the card reader.
Make sure it is correctly seated. Depending on the design, it may be
necessary to use a memory card adapter, e.g. for microSD cards.
3. Remove the card reader after use.
REV2020-09-04
V1.1 aw
Subject to change without notice.
microSD socket
USB 3.0 plug, type A
51778 / 59091
USB-C™ 2.0 plug
USB 3.0 plug, type A
SD socket
microSD socket
5.0 V
USB-C™: 480 Mbit/s
USB 3.0: 5.0 Gbit/s
SDXC, SDHC, microSD and
SD memory cards
75 x 20 x 11
12
6 Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE! Material damage
• Clean only with a dry, soft cloth.
• Do not use cleaning agents and chemicals.
• Store cool and dry.
• Store the product out the reach of children and in a dry and dust-
protected ambience when not in use.
• Keep and use the original packaging for transport.
7 Disposal Notes
7.1 Product
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami-
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection
points – paper belongs in paper bins, plastics belong in yellow sacks and
glass belongs in used glass bins.
DE4535302615620
8 EU Declaration of Conformity
With the CE sign, Goobay
GmbH ensures, that the product is conformed to the basic European
standards and directives.
9 Symbols used
Direct current
For indoor use only
Recycling
- 2 -
51778 / 59091
®
, a registered trademark of the Wentronic
IEC 60417- 5031
IEC 60417- 5957
ISO 7001 - PI PF 066
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
Goobay
®