ASROCK FM2A68M-DG3+ Manual Del Usuario página 15

Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.1 No. 11)
Chassis and Power Fan
Connectors
(4-pin CHA_FAN1)
(see p.1 No. 15)
(3-pin PWR_FAN1)
(see p.1 No. 21)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1 No. 2)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
ATX Power Connector
(24-pin ATXPWR1)
(see p.1 No. 5)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
DUMMY SPEAKER
1
+5V DUMMY
FAN_SPEED_CONTROL
CHA_FAN_SPEED
+12V
GND
FAN_SPEED_CONTROL
CPU_FAN_SPEED
+12V
GND
1 2 3 4
12 24
1 13
20-Pin ATX Power Supply Installation
Please connect the chassis
speaker to this header.
Please connect the fan cable
to the fan connector and
match the black wire to the
ground pin.
Please connect the CPU fan
cable to the connector and
match the black wire to the
ground pin.
Pin 1-3 Connected
3-Pin Fan Installation
Please connect an ATX power
supply to this connector.
12
1
FM2A68M-DG3+
24
13
13