Power Over Ethernet (Poe) - Acer Veriton N2010G Thin Client Guía Rápida De Instalación

Power Over Ethernet (POE)

(for selected models)
The POE 802.3at/af installation option allows the VN2010G
to communicate and receive power on the same
10/100/1000Base-T Ethernet cable.
1
Connect the Ethernet cable to the RJ45 port on the
VN2010G.
2
Plug the other end of the Ethernet cable into an
802.3at/af certified host system LAN port, or
802.3at/af port injector.
NOTE: 802.3af host systems can provide power to the VN2010G via POE
if certain peripherals are shut off. If POE is not providing enough power,
connect a power supply.
RJ45/Ethernet Connector Pinouts
These are the locations for the Ethernet port. Use care when
handling.
WARNING: POE Ethernet connectors channel high voltage current.
Do not make direct physical contact with the pins.
14