ELECTRIC OVEN
Instruction Manual
Due to on going product improvements, specifications and
accessories may change without notice. Actual product may
slightly to that depicted.
IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
Carefully read this manual before using this appliance.
Ensure that you know how the appliance functions and how to operate it
Maintain the appliance in accordance with the instructions to ensure that it functions
properly.
Keep this manual with the appliance. If the appliance is to be used by a third party, this
instruction manual must be supplied with it.
The safety instructions do not by themselves eliminate any danger completely and proper
accident prevention measures must always be used.
No liability can be accepted for any damage caused by non-compliance with these
instructions or any other improper use or mishandling.
INTENDED USE
This appliance is intended to be used in household and similar applications such as
Staff kitchen areas in shops, offices and other working environments
Farm houses
By clients in hotels, motels and other residential type environments
Bed and breakfast type environments
This appliance is not suitable for commercial or industrial use. Do not use this appliance for
anything other than its intended use.
PACKING CONTENTS
1X Mini Oven
1x Wire Rack
1x Enamel baking and crumb tray
1x Rack and tray handle
1x Instruction Manual
GENERAL AND ELECTRICAL SAFETY
Do not use this appliance for any use other than its intended purpose.
When using electric appliances always observe safety regulations where applicable to
reduce the risk of fire, electric shock and personal injury. Always check that the power
supply corresponds to the voltage on the rating plate. Always unplug the appliance when
not in use.
Supply cord and plug
Always unplug from mains supply when not in use. Do not abuse or damage the power
cord. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard. Do not let the supply cord
touch hot surface.