Troubleshooting - Waldbeck 10032086 Manual Del Usuario

5 Place cookware on stove top after appropriate flame is established for
cooking.
6 Cook with the door closed. View fire through horizontal viewing port.
Open door to add fuel or push it deeper into the combustion chamber. The
stove is very intuitive to use; more fuel larger fire, less fuel, smaller fire.
7 After cooking, insure fuel is fully exhausted and the stove has cooled to
touch before handling.

TROUBLESHOOTING

Problem Possible Cause
Difficulty igniting Inadequate amount of fuel.
fuel.
Wet or damp fuel.
Combustion chamber
overloaded.
Excess smoke during Wet fuel..
ignition.
Smoke from leaves and green
yard debris.
Smoke during high Fire too large.
power operation,
after ignition phase.
Smoke during low Mixed fuels can cause erratic
power operation, flame.
after ignition phase.
Smoke observed Fuel Green.
when adding fuel.
Fuel overloaded.
Continued smoke Fuel has low melting point
after combustion. an high ash content (leaves,
straw, etc.) or green.
Suggested Solution
Add fuel.
Use dry Fuel.
Insure minimum clearance of
fuel (3 cm from fuel to top of
combustion chamber).
Use dry fuel.
Use dry wood shavings or
twigs.
Use less fuel.
Insure fuel dry, not green.
Use dry fuel.
Add less fuel.
Normal outcome, add dry
wood or twigs.
EN
9