Shop-Vac 305A Serie Manual Del Usario página 4

2. Remove clevis pins and hairpin clips from side broom arm.
3. Remove dirt hopper from sweeper frame. Move side broom
arm over mounting bracket as shown in image.
4. Position tracking belt coming from top of rear wheel over
mounting bracket. Then position tracking belt coming from
bottom of rear wheel under mounting bracket. Finish installing
tracking belt as shown in image.
5. Slide side broom arm
into mounting bracket
aligning holes as
shown in image.
Insert clevis pins and
secure with hairpin
clips.
PAGE 4
ASSEMBLY (CONT'D.)
Hair Pin Clip
Hair Pin Clip
Broom
Arm
Outside
Tracking
Clevis Pin
Hair Pin Clip
Clevis Pin
Inside
Tracking
Belt Guides
Mounting
Bracket
Mounting
Bracket
Clevis Pin