Getting Started; Initial Setup - Bryton Cardio 60 Guia Del Usuario

Getting Started

Turn On/Off
Press and hold to turn the
device on or off.
Reset
To reset the device, press and
hold all three keys (
the same time.

Initial Setup

When turning the device on for
the first time, the setup wizard
appears on screen. Follow the
instructions to complete setup.
1. Select the display language.
2. Select the daylight saving
time.
3. Select the unit of
measurement.
4. Enter your "user profile".
It is recommended to input
the data. Data accuracy will
highly affect your training
analysis.
5. Read and accept the Safety
Agreement.
Cardio 60 User's Guide
Connect, Sync, and
Charge
1. Connect the device to a
PC using the supplied USB
charging clipper.
2. Download the Bryton Bridge
2 application at brytonsport.
com and sync with the
/ / ) at
OK
q
device.
Keep the device connected to
the PC to charge the battery.
Attach the USB charging clipper
onto the device and plug the
other end to a PC.
Note:
• For first time use, charge the battery
for about 3 hours.
• Please send the watch back to local
distributor for any battery issues.
• Improper battery replacement may
cause an explosion. When replacing
a new battery, use only the original
battery or a similar type of battery
specified by the manufacturer.
Disposal of the used batteries must
be carried out in accordance to the
regulations of your local authority.
For better environmental
protection, waste batteries
should be collected
separately for recycling or
special disposal.
AM
3