Publicidad
STEP 7
Attach the spring (P11) by inserting
the hook end into the hole on the
flipper bar, and screwing the loop
end into the leg using 1 "C" screw.
Repeat on the other side.
STEP 8
Install the modesty panel (P4) by
screwing it to the legs with 4 "C"
screws.
Orient it so the wire management
tray is at the top and facing the
sitting side of the table.
UPDATED AS OF: 02/26/2018
P11
P4
7 of 8
Publicidad
