Local Time Setting; Date Setting - Level VD31 Manual De Instrucciones

LOCAL TIME SETTING

1) Pull out the crown to second click when the second hand is at the 12 o'clock
position.
2) Turn the crown to set the hour and minute hands. (make sure 24 hour hand is
set correctly).
3) Push the crown back in the normal position in accordance with a time signal.
NOTA:
- The 24 hour hand moves correspondingly with the hour hand.
- The moment the date changes is midnight. When setting the hour hand, make
sure that AM/PM is correctly set by using the 24 hour hand as an AM/PM
indicator.
DUAL TIME SETTING
- When moving to a country or area in a different time zone, adjust the dual
hour hand to that country / area :
Quick set the dual time
1) Crown at normal position.
2) Adjust the time by pressing the button A or B.
Button A : - 1 hour / push - Button B : +1 hour / push
Precise adjustment of the the dual time
1) Pull out the crown to second click when the second hand is at the 12 o'clock
position.
2) Adjust the time by pressing the button A or B.
Button A : -10 minute / push
Button B : +10 minute / push
3) Push the crown back in the normal position in accordance with a time signal.

DATE SETTING

- Before setting the date, be sure to set the time.
1) Pull out the crown to the first click.
2) Turn the crown clockwise until the desired date appears.
3) Push the crown back in the normal position.
NOTE:
- Do not set the date during any time between 9:00 P.M. and 1:00 A.M. Otherwise,
the date may not change properly. If it is necessary to set the date during that
time period, first change the time to any time outside it, set the date and then
reset the correct time.