Getting Started - Denver Electronics IR-140 Manual Del Usurio

Getting started

The radio is powered by the built-in lithium battery. A USB cable and power adapter
are supplied in the product package.
Press and hold the [ ] button to turn on the radio.
Press and hold the same button to turn off the radio.
The standby mode is enabled only when the mains is connected. So, to be able to
make use of the alarm clock function, the mains should be connected.
Connect the mains to the radio, and press and hold the [ ] button to turn it on.
Pressing the [ ] button again will put the radio into standby.
ENG-3