Charging Instructions - HoMedics PowerDent deluxe Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Dentists recommend that you brush your
teeth gently to avoid tooth and gum
abrasion. Exclusive HoMedics' Smart
Sensor™ technology activates the brushing
action when just the lightest amount of
pressure is applied, to help protect teeth and
gums and reinforce proper brushing habits.
CHARGING
INSTRUCTIONS
Follow this procedure before you use the
PowerDent Deluxe for the first time.
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade is
wider than the other). This plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not
change the plug in any way.
1. Plug the charger base into a 120-volt
outlet. Place the handle into the base and
allow it to charge for at least 16 hours
before using it for the first time.
2. The charger indicator light on the handle
will glow red when the toothbrush is
correctly placed in the charger base. This
is an indication that the handle is
charging. The indicator will turn off when
the toothbrush is removed from the base.
3. The optimum voltage for charging is 120V.
4. To maintain the unit's full performance, it
should always be placed back on the
charging base after use.
Note: Charge for at least 16 hours before
using the unit for the first time.
®
DUPONT
SOFT
BRISTLES
2 COLOR CODED
BRUSH HEADS
ON/OFF
POWER
BUTTON
INDICATOR
LIGHT
CHARGING
BASE
4
Figure A
HOW TO USE POWERDENT DELUXE
1. Attach the brush head to the handle by positioning the
brush head at a 90-degree angle to the left of the
handle (See Figure A). Turn the brush head counter
clockwise one-quarter turn, so the bristles are facing the
same direction as the ON/OFF button, and the brush
head will snap into place. The Smart Sensor logo will be
facing forward as will the bristles. (See Figure B)
2. Before brushing, wet the brush head to moisten, then
apply toothpaste.
3. TO USE WITH SMART SENSOR TECHNOLOGY
Push the ON/OFF button briefly, and the corresponding
Figure B
LED light will glow green, indicating that the power is
ON. Apply brush head against your teeth to activate the
toothbrush (See Figure C). Unit will not operate (no
function) until pressure is applied to the brush head.
If you do not apply pressure to the brush head for 15
seconds the unit will turn off, along with the green
LED light.
TO USE WITHOUT SMART SENSOR TECHNOLOGY
Press and hold the ON/OFF button for about 2
seconds, after which time the unit will automatically
begin working. This option, to override the Smart
Sensor feature, is available for those who have learned
how to brush with a light touch or would prefer not to
use this feature.
Figure C
4. Guide the brush head to your teeth, placing it at a 45
degree angle towards the gum line. Gently guide the
brush head from tooth to tooth, spending a few
seconds on the surface of each tooth.
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hd-210c

Tabla de contenido