Level One NVR-0316 Guía De Instalación Rápida página 8

8 NVR-0316 Quick Installation Guide
Connect to the NVR
There are various ways you can connect to the NVR and below are the
suggested methods for different network setup:
Use LevelOne Device Search Utility
If the NVR is placed in a corporate network or a local area network where a
DHCP server is already presented, run the "LevelOne Device Search" utility
from a computer that is on the same network and locate the NVR with its IP
address that is assigned by the top-level DHCP server.
To begin, launch the "Device Search" utility from the CD and proceed with the
installation:
Once the installation is complete, check the "Launch the program" option and
click "Finish".
The search should start automatically and its status should be displayed.