TruXedo TRUXPORT Manual De Instalación Y Propietarios página 5

11
Close cover:
A
Release safety straps,
and unroll cover over
pickup bed. Open tailgate.
Use both hands to close!!!
Both latches must be fully engaged!!!
• To prevent accidental release of tailgate header, ensure header is securely latched to side rails on both sides of pickup bed
!
9
before driving vehicle.
• To prevent wind lift, secure loop and hook fasteners along entire length of both side rails before driving vehicle.
12
Cover tension:
Keeping cover taut:
Periodically or as needed, pull cover tight across width of
pickup bed, secure loop and hook on side rails.
Cover may appear loose or relaxed in cooler or cold conditions.
Cover may appear tight in warmer or hot conditions.
13
Open cover:
A
First Latch
With tailgate open, press
downward on first latch to
release.
B
Tailgate Header
Header Stop
With tailgate open,
hook tailgate header
into header stops on
both sides of vehicle.
space wide
For ease of operation, periodically clean
with high pressure water to remove dirt
and dust.
B
Tailgate Header
Second Latch
To release second latch, repeat process
on opposite side. Place free hand on
tailgate header to control header
movement on release.
C
Tailgate Header Latch Engaged
Rotate tailgate
header down until
both latches engage.
Listen for double click.
C
Roll up cover. Do Not disengage
loop and hook fasteners prior to
rolling up cover.
___ 5 ___
D
Secure loop to hook
fasteners on one side
rail by pressing edge of
cover along full length
of rail.
Latch fully engaged!!!
Latch not fully engaged!!!
D
Always secure cover
at front of pickup bed
with both Hook straps
when cover is open. "Opened
cover must be rolled tight, properly
secured away from the cab, and
cab window with both hook straps
when driving vehicle". DO NOT
STOW COVER AGAINST TRUCK
CAB OR CAB WINDOW.
E
Pull cover tight across
width of pickup bed.
Secure loop and hook
fasteners on opposite
side rail.
latch assembly
hook
straps