Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INITIAL SETUP
1.
Remove your scale from the protective bag and insert the batteries. Place
the scale on a flat surface.
2.
To complete setup and pair your scale to the Escali SmartConnect mobile
app, please visit: www.escali.com/setup
MOBILE DEVICE REQUIREMENTS
To view mobile device requirements online, please visit:
www.escali.com/smartconnect/devices
PRODUCT SUPPORT
24/7 Online community support: http://escali.zendesk.com
Email support: support@escali.com
Phone support: 1-952-469-1965
WEIGHT MEASUREMENTS
1.
Press the power [
2.
Press UNIT [
3.
Place an item on the scale in the center of the platform.
TARE (ADD & WEIGH)
Ignore the weight of a container:
1.
Place a container on the platform before turning the scale on.
1.
Turn the scale on, add the container and press TARE [
2.
Wait 3 seconds and zero weight will display.
3.
Add items into the container to be weighed.
Find the individual weight of multiple items in one container:
1.
Press TARE [
2.
Add additional items to be weighed.
3.
Repeat steps 1-2 for each additional item.
Reset the scale back to zero weight:
1.
If nothing is on the scale and it does not read zero weight, press TARE
[
] to reset the scale back to zero weight.
Attention! The scale will tare any amount of weight. Once the total weight ac-
tually on the scale reaches the maximum capacity of 11 pounds (5000 g.) the
overload warning code (EEEE) will display.
KITCHEN TIMER
1.
Press the timer symbol [
2.
Press UNIT [
3.
After selecting the last number, press [
4.
Press [
] to switch back into scale mode. The timer will continue to run.
Press [
] to switch back into timer mode.
] to turn the scale on.
] to change units (pounds, ounces, grams.)
] to reset the scale back to zero weight.
] to enter into the timer feature.
] to change numbers. Press [
-OR-
] to start the timer.
2
].
] to confirm.
Publicidad
Tabla de contenido
