Kohler K-1122-GLA Guía Del Usario página 2

1-1/4"
(3.2 cm)
16"
(40.6 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2"
Bath Drain
Product Information
Applicable product:
Integral apron, left drain
Integral apron, right drain
Fixture*:
Bathing well:
Basin area bottom 45-1/8" (114.6 cm) x 19-11/16" (50 cm)
Basin area top 52-3/4" (134 cm) x 25-5/16" (64.3 cm)
Weight 100 lbs (45.4 kg)
To overflow:
Water depth 15" (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Blower motor: Heater
300 W
Required accessories:
Clearflo slotted overflow brass bath
drain or
Clearflo slotted overflow bath drain –
PVC pipe
1064185-1-D
60" (152.4 cm)
4-1/8"
3/4" (1.9 cm)
(10.5 cm)
K-1122-GLA
K-1122-GRA
V Hz A
120 60 5
K-7271
K-7272
No change in measurements if connected with
drain illustrated. (K-7272)
19"
(48.3 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
Blower motor is supplied with a 24" (61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
46 lbs/square foot (223 kg/square meter) loading.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2
1-1/4"
(3.2 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
32"
(81.3 cm)
120 V, 15 A, 60 Hz
Kohler Co.