Camera Installation - Idis DC-D1223F Guía Rápida

Camera Installation

For more information on other devices comprising the
overall system, refer to their respective installation
manuals.
Shield case is included with
Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall
or ceiling is not strong enough to support its
weight.
1
Hold the camera body and dome cover and turn
the dome cover clockwise to remove the dome
cover from the camera body as follows:
2
Turn the camera body counterclockwise while
pressing the body hook of the bottom cover to
remove the camera body from the bottom cover.
6
DC-D1223F
only.
3
Remove the ceiling tile from the ceiling. Draw
circle on the tile by using the mounting template
provided with the camera. Cut the circle out of the
ceiling tile.
Ceiling
4
Connect the safety wire provided with the camera
to the bottom cover and ceiling. It prevents the
bottom cover from falling on to the floor.
5
Use the screws provided with the camera to
secure the bottom cover on a ceiling.
Use the provided guide pattern to check
the distance between the screws.
Guide Pattern