Manhattan 177795 Manual Del Usuario página 2

Performance Wireless Optical Mouse • User Manual
Thank you for purchasing the MANHATTAN
Model 177795. For specifications, go to www.manhattan-products.com.
Installation
1. On the underside of the mouse, pull out the micro receiver and plug it into a USB
port on the computer.
2. Slide the cover off the battery compartment and insert the included AA battery;
then replace the cover. The scroll wheel LED should flash red for a few seconds to
indicate the mouse is ready to use.
Scroll
wheel
& LED
Resolution
button
Operation
• Operate the mouse within 10 m (33 ft.) of the receiver.
• Press the resolution button to cycle through the 3 resolution settings: 1000 dpi
(scroll wheel LED blinks once); 1500 dpi (LED blinks twice); 2000 dpi (LED blinks
three times).
• The scroll wheel LED lights red to indicate low battery power. NOTE: Use only
alkaline batteries.
• The mouse automatically enters a sleep mode after approximately 8 minutes of
inactivity to save power. Press any key or scroll to wake it.
• During extended periods of non-use, remove the battery to avoid corrosion and
store the receiver in its storage slot.
• If the signal carrying the identification code between the mouse and the receiver
is disrupted (possibly by a sudden rise in temperature, magnetic field or vibration),
simply remove and reconnect the receiver, then press the right and scroll buttons
for a few seconds to re-establish the connection.
2
ENGLISH
Performance Wireless Optical Mouse,
®
Battery
compartment
English
USB micro
receiver &
storage slot