Publicidad

Enlaces rápidos

Version 1.1
Published November 2020
Copyright©2020 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Publicidad

Tabla de contenido
loading

Resumen de contenidos para ASROCK B450 Steel Legend

  • Página 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Página 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply) The terms HDMI®...
  • Página 3 B450 Steel Legend Motherboard Layout...
  • Página 4: Tabla De Contenido

    No. Description ATX 12V Power Connector (ATX12V1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) AMD Fan LED Header (AMD_FAN_LED1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) CPU/Water Pump Fan Connector (CPU_FAN2/WP) CPU Fan Connector (CPU_FAN1) ATX Power Connector (ATXPWR1) USB 3.2 Gen1 Header (USB3_5_6) SATA3 Connector (SATA3_1) SATA3 Connector (SATA3_2)
  • Página 5 B450 Steel Legend I/O Panel No. Description No. Description USB 2.0 Ports (USB_56) USB 3.2 Gen2 Type-A Port (USB31_TA_1) LAN RJ-45 Port* USB 3.2 Gen2 Type-C Port (USB31_TC_1) Central / Bass (Orange) USB 3.2 Gen1 Ports (USB3_12) Rear Speaker (Black) USB 3.2 Gen1 Ports (USB3_34)***...
  • Página 6 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange...
  • Página 7: Package Contents

    If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Página 8 * For Ryzen Series CPUs (Picasso and Raven Ridge), ECC is only supported with PRO CPUs. * Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/) * Please refer to page 22 for the table for AMD non-XMP mem- ory frequency support.
  • Página 9 B450 Steel Legend AMD Ryzen series CPUs (Matisse, Summit Ridge and Pinnacle Expansion Ridge) Slot • 2 x PCI Express 3.0 x16 Slots (PCIE1: x16 mode; PCIE4: x4 mode)* AMD Ryzen series CPUs (Picasso, Raven Ridge) • 2 x PCI Express 3.0 x16 Slots (PCIE1: x8 mode; PCIE4: x4...
  • Página 10 Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC892/897 Audio Codec) • Supports Surge Protection • PCB Isolate Shielding • Individual PCB Layers for R/L Audio Channel • Gold Audio Jacks • PCIE x1 Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111H • Supports Wake-On-LAN • Supports Lightning/ESD Protection...
  • Página 11: Amd Fan Led Header (Amd_Fan_Led1)

    M.2 PCI Express module up to Gen3 x2 (16 Gb/s) ** ** If M2_1 is occupied, PCIE4 will be disabled. ** Supports NVMe SSD as boot disks ** Supports ASRock U.2 Kit Connector • 1 x COM Port Header • 1 x TPM Header • 1 x Power LED and Speaker Header...
  • Página 12 • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjust- ing the setting in the BIOS, applying Untied Overclocking Technology, or using third- party overclocking tools.
  • Página 13 B450 Steel Legend Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Página 14 2.1 Installing the CPU Unplug all power cables before installing the CPU.
  • Página 15 B450 Steel Legend...
  • Página 16 2.2 Installing the CPU Fan and Heatsink After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
  • Página 17 B450 Steel Legend 4-pin FAN cable...
  • Página 18 Installing the AM4 Box Cooler SR2...
  • Página 19 B450 Steel Legend...
  • Página 20 4-pin FAN cable 4-pin FAN cable RGB LED Cable +12V *The diagrams shown here are for reference only. The headers might be in a different position on your motherboard. Please refer to page 32 for the orientation of AMD Fan LED Header (AMD_ FAN_LED1).
  • Página 21 B450 Steel Legend Installing the AM4 Box Cooler SR3...
  • Página 23 B450 Steel Legend 4-pin FAN cable USB 2.0 Header Please note that this connector is the interface to the LED control board on the SR3, it requires the AMD utility "SR3 Settings Software" to control the LED. *The diagrams shown here are for reference only. The headers might be in a different position on your...
  • Página 24 2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs. 2.
  • Página 25 B450 Steel Legend Ryzen Series CPUs (Pinnacle Ridge): UDIMM Memory Slot Frequency (Mhz) 2933 2933 2933 2933 2933 SR/DR SR/DR 2667 SR/DR SR/DR SR/DR SR/DR 2133-2400 Ryzen Series CPUs (Picasso): UDIMM Memory Slot Frequency (Mhz) 2933 2667 2667 2400 2133...
  • Página 26 Ryzen Series CPUs (Summit Ridge): UDIMM Memory Slot Frequency (Mhz) 2667 2667 2667 2667 2667 SR/DR SR/DR 2667 SR/DR SR/DR SR/DR SR/DR 2133-2400 Ryzen Series CPUs (Raven Ridge): UDIMM Memory Slot Frequency (Mhz) 2933 2667 2667 2667 2667 SR/DR SR/DR 2667 SR/DR SR/DR...
  • Página 27 B450 Steel Legend The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Página 28 2.4 Expansion Slots (PCI Express Slots) There are 6 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Página 29 B450 Steel Legend 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper...
  • Página 30 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Página 31 B450 Steel Legend Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 16) header. PLED+ PLED+ PLED- Serial ATA3 Connectors These six SATA3 Right Angle:...
  • Página 32 Front Panel Audio Header This header is for PRESENCE# (9-pin HD_AUDIO1) connecting audio devices MIC_RET OUT_RET (see p.1, No. 26) to the front audio panel. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly.
  • Página 33 B450 Steel Legend CPU/Water Pump Fan This motherboard Connector provides a 4-Pin water FAN_VOLTAGE_CONTROL FAN_SPEED (4-pin CPU_FAN2/WP) cooling CPU fan FAN_SPEED_CONTROL (see p.1, No. 5) connector. If you plan to connect a 3-Pin CPU water cooler fan, please connect it to Pin 1-3.
  • Página 34 AMD FAN LED Header AMD FAN LED Header is used (4-pin AMD_FAN_ to connect RGB LED 12V G R LED1) extension cable that comes with (see p.1, No. 3) AMD heatsink. The cable connection allows users to choose from various LED lighting effects.
  • Página 35 B450 Steel Legend 2.7 M.2_SSD (NGFF) Module Installation Guide (M2_1) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1) supports M Key type 2230/2242/2260/2280 M.2 PCI Express module up to...
  • Página 36 Step 3 Before installing a M.2 (NGFF) SSD module, please loosen the screws to remove the M.2 heatsink. Step 4 Prepare the M.2 standoff that comes with the package. Then hand tighten the standoff into the desired nut location on the motherboard. Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot.
  • Página 37 B450 Steel Legend M.2_SSD (NGFF) Module Support List Vendor Interface Intel PCIe INTEL 6000P-SSDPEKKF256G7 (nvme) Intel PCIe INTEL 6000P-SSDPEKKF512G7 (nvme) Intel PCIe INTEL 600P-SSDPEKKW256G7-256GB (nvme) Kingston PCIe Kingston SHPM2280P2 / 240G (Gen2 x4) SanDisk PCIe SanDisk-SD6PP4M-128G(Gen2 x2) Samsung PCIe Samsung XP941-MZHPU512HCGL(Gen2x4) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for...
  • Página 38 2.8 M.2_SSD (NGFF) Module Installation Guide (M2_2) The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (M2_2) supports M Key type 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x2 (16 Gb/s).
  • Página 39 B450 Steel Legend Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut.
  • Página 40 SanDisk SATA Sandisk Z400s-SD8SNAT-128G-1122 SanDisk SATA SanDisk-SD6SN1M-128G Transcend SATA Transcend TS256GMTS800-256GB V-Color SATA V-Color 120G V-Color SATA V-Color 240G SATA WD GREEN WDS240G1G0B-00RC30 For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Página 41 B450 Steel Legend 2.9 ASRock Polychrome RGB ASRock Polychrome RGB is a lighting control utility specifically designed for unique individuals with sophisticated tastes to build their own stylish colorful lighting system. Simply by connect- ing the LED strip, you can customize various lighting schemes and patterns, including Static, Breathing, Strobe, Cycling, Music, Wave and more.
  • Página 42 Connecting the Addressable RGB LED Strip Connect your Addressable RGB LED strip to the Addressable LED Header (ADDR_LED1) on the motherboard. ADDR_LED1 DO_ADDR VOUT 1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be damaged. 2.
  • Página 43 ASRock Polychrome RGB Utility Now you can adjust the RGB LED color through the ASRock Polychrome RGB utility. Download this utility from the ASRock Live Update & APP Shop and start coloring your PC style your way! Drag the tab to customize your preference.
  • Página 44: Lieferumfang

    1 Einleitung Vielen Dank, dass Sie sich für das B450 Steel Legend von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Página 45: Technische Daten

    * Für Prozessoren der Ryzen-Serie (Picasso- und Raven Ridge), ECC wird nur mit PRO-Prozessoren unterstützt. * Weitere Informationen finden Sie in der Speicherkompatibilität- sliste auf der ASRock-Webseite. (http://www.asrock.com/) * Die Tabelle für AMDs Non-XMP-Speicherfrequenzen finden Sie auf Seite 22. Weitere Einzelheiten finden Sie in der QVL auf ASRocks Webseite.
  • Página 46 Erweiter- CPUs der AMD-Ryzen-Serie (Matisse, Summit Ridge und Pinnacle Ridge) ungssteckplatz • 2 x PCI-Express 3.0-x16-Steckplatz (PCIE1:x16-Modus; PCIE4:x4-Modus)* CPUs der AMD-Ryzen-Serie (Picasso, Raven Ridge) • 2 x PCI-Express 3.0-x16-Steckplatz (PCIE1:x8-Modus; PCIE4:x4-Modus)* CPUs der AMD-Athlon-Serie • 2 x PCI-Express 3.0-x16-Steckplatz (PCIE1:x4-Modus; PCIE4:x2-Modus)* * Unterstützt NVMe-SSD als Bootplatte * Wenn M2_1 belegt ist, wird PCIE4 deaktiviert.
  • Página 47 B450 Steel Legend Audio • 7.1-Kanal-HD-Audio mit Inhaltsschutz (Realtek ALC892/897-Audiocodec) • Unterstützt Überspannungsschutz • PCB-isolierte Abschirmung • Individuelle PCB-Layer für rechten/linken Audiokanal • Goldene Audioanschlüsse • PCIE-x1-Gigabit-LAN 10/100/1000 Mb/s • Realtek RTL8111H • Unterstützt Wake-On-LAN • Unterstützt Schutz gegen Blitzschlag/elektrostatische Entladung • Unterstützt energieeffizientes Ethernet 802.3az...
  • Página 48 2260-/2280-/22110-M.2-SATA-III-6,0-Gb/s-Modul und M.2- PCI-Express-Modul bis Gen3 x 2 (16 Gb/s)** ** Wenn M2_1 belegt ist, wird PCIE4 deaktiviert. ** Unterstützt NVMe-SSD als Bootplatte ** Unterstützt ASRock U.2-Kit Anschluss • 1 x COM-Anschluss-Stiftleiste • 1 x TPM-Stiftleiste • 1 x Betrieb-LED- und Lautsprecher-Stiftleiste • 1 x RGB-LED-Stiftleiste...
  • Página 49 Zertifizierun- • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind.
  • Página 50 1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. CMOS-löschen-Jumper Kurzgeschlossen: CMOS (CLRCMOS2) löschen 2-poliger Jumper (siehe S.
  • Página 51 B450 Steel Legend 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen.
  • Página 52 Betrieb-LED- und Bitte verbinden Sie die SPEAKER DUMMY Lautsprecher-Stiftleiste Betrieb-LED des Gehäuses DUMMY (7-polig, SPK_PLED1) und den Gehäuselautsprecher (siehe S. 1, Nr. 16) mit dieser Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese sechs SATA-III- (SATA3_1: Anschlüsse unterstützen siehe S. 1, Nr. 9) SATA-Datenkabel für interne (SATA3_2: Speichergeräte mit einer Date...
  • Página 53 B450 Steel Legend Audiostiftleiste Diese Stiftleiste dient PRESENCE# (Frontblende) dem Anschließen von MIC_RET OUT_RET (9-polig, HD_AUDIO1) Audiogeräten an der (siehe S. 1, Nr. 26) Frontblende. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt.
  • Página 54 CPU-/Wasserpumpen- Dieses Motherboard bietet einen Lüfteranschluss 4-poligen Wasserkühlung-CPU- FAN_VOLTAGE_CONTROL FAN_SPEED (4-polig, CPU_FAN2/WP) Lüfteranschluss. Falls Sie einen FAN_SPEED_CONTROL (siehe S. 1, Nr. 5) 3-poligen CPU-Wasserkühler- lüfter anschließen möchten, verbinden Sie ihn bitte mit Kontakt 1 bis 3. ATX-Netzanschluss Dieses Motherboard bietet (24-polig, ATXPWR1) einen 24-poligen ATX-Netzan- (siehe S.
  • Página 55 B450 Steel Legend AMD-Lüfter-LED- Die AMD-Lüfter-LED-Stiftleiste Stiftleiste dient dem Anschluss des mit dem 12V G R (4-polig, AMD-Kühlkörpers gelieferten AMD_FAN_LED1) RGB-LED-Verlängerungskabels. (siehe S. 1, Nr. 3) Der Kabelanschluss ermöglicht Nutzern die Wahl zwischen ver- schiedenen LED-Lichteffekten. Achtung: Installieren Sie das Lüfter-LED-Kabel niemals falsch...
  • Página 56: Contenu De L'emballage

    1 Introduction Nous vous remercions d’avoir acheté cette carte mère ASRock B450 Steel Legend, une carte mère fiable fabriquée conformément au contrôle de qualité rigoureux et constant appliqué par ASRock. Fidèle à son engagement de qualité et de durabilité, ASRock vous garantit une carte mère de conception robuste aux performances élevées.
  • Página 57 PRO. * Veuillez consulter la liste de prise en charge des mémoires sur le site Web d'ASRock pour de plus amples informations. (http://www.asrock.com/) * Veuillez consulter la page 22 pour la table de prise en charge de la fréquence de la mémoire AMD non XMP.
  • Página 58 Fente Processeurs AMD série Ryzen (Matisse, Summit Ridge et Pinnacle Ridge) d’expansion • 2 x fentes PCI Express 3.0 x 16 (PCIE1:mode x16 ; PCIE4 :mode x4)* Processeurs AMD série Ryzen (Picasso, Raven Ridge) • 2 x fentes PCI Express 3.0 x 16 (PCIE1:mode x8 ; PCIE4 :mode x4)* Processeurs AMD série Athlon • 2 x fentes PCI Express 3.0 x 16 (PCIE1:mode x4 ;...
  • Página 59 B450 Steel Legend Audio • Audio 7.1 CH HD avec protection du contenu (codec audio Realtek ALC892/897) • Prend en charge la protection contre les surtensions • Blindage isolant PCB • Couches de PCB individuelles pour canal audio D/G • Connecteurs jack audio or Réseau...
  • Página 60 Express touche M jusqu’à Gen3 x2 (16 Go/s)** ** Si M2_1 est occupé, PCIE4 est désactivé. ** Prend en charge les SSD NVMe comme disques de démarrage ** Prend en charge le kit ASRock U.2 Connecteur • 1 x embase pour port COM • 1 x embase TPM...
  • Página 61 • FCC, CE • ErP/EuP Ready (alimentation ErP/EuP ready requise) * pour des informations détaillées de nos produits, veuillez visiter notre site :http://www.asrock.com Il est important de signaler que l’ o verclocking présente certains risques, incluant des modifica- tions du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’ o utils d’...
  • Página 62 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court-circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ». Cavalier Clear CMOS Court-circuité : Fonction (CLRCMOS2)
  • Página 63 B450 Steel Legend 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Página 64: Gen1 Peut Prendre En Charge

    Prise DEL d’alimentation et Veuillez brancher la DEL SPEAKER DUMMY haut-parleur d'alimentation du châssis et le DUMMY (SPK_PLED1 à 7 broches) haut-parleur du châssis sur ce (voir p.1, No. 16) connecteur. PLED+ PLED+ PLED- Connecteurs Serial ATA3 Ces six connecteurs SATA3 sont (SATA3_1: compatibles avec les câbles de voir p.1, No.
  • Página 65 B450 Steel Legend Embase audio du panneau Cette embase sert au PRESENCE# frontal branchement des appareils audio MIC_RET OUT_RET (HD_AUDIO1 à 9 broches) au panneau audio frontal. (voir p.1, No. 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L’ a udio haute définition prend en charge la technologie Jack Sensing (détection de la fiche), mais le panneau grillagé...
  • Página 66 Connecteur pour ventilateur Cette carte mère est dotée d’un de processeur /pompe à eau connecteur pour ventilateur de FAN_VOLTAGE_CONTROL FAN_SPEED (CPU_FAN2/WP à 4 processeur à refroidissement par FAN_SPEED_CONTROL broches) eau à 4 broches. Si vous envisagez (voir p.1, No. 5) de connecter un ventilateur de refroidisseur d'eau pour processeur à...
  • Página 67 B450 Steel Legend Embase LED de L'embase LED de VENTILATEUR VENTILATEUR AMD AMD sert à connecter le câble 12V G R (AMD_FAN_LED1 à 4 d'extension LED RVB fourni avec broches) un dissipateur thermique AMD. La (voir p.1, No. 3) connexion par câble permet aux uti- lisateurs de choisir parmi plusieurs effets lumineux LED.
  • Página 68: Contenuto Della Confezione

    1 Introduzione Congratulazioni per l’acquisto della scheda madre ASRock B450 Steel Legend, una scheda madre affidabile prodotta secondo i severissimi controlli di qualità ASRock. La scheda madre offre eccellenti prestazioni con un design robusto che si adatta all'impegno di ASRock di offrire sempre qualità e durata.
  • Página 69 ECC senza CPU PRO. * Per maggiori informazioni fare riferimento all'elenco dei supporti di memoria sul sito di ASRock. (http://www.asrock.com/) * Fare riferimento a pagina 22 per la tabella delle frequenze di memoria AMD non-XMP supportate. Per altri dettagli, fare riferi- mento a QVL sul sito ASRock.
  • Página 70 CPU serie AMD Athlon • 2 x alloggi PCI Express 3.0 x16 (PCIE1:modalità x4; PCIE4:modalità x2)* * Supporto di SSD NVMe come disco d’avvio * Se l'alloggio M2_1 è occupato, l'alloggio PCIE4 viene disabilitato. • 4 x alloggi PCI Express 2.0 x1 • Supporta AMD Quad CrossFireX e CrossFireX ** Questa funzione è...
  • Página 71 Gb/s di tipo M Key 2230/2242/2260/2280/22110 ed il modulo M.2 PCI Express fino a Gen3 x2 (16 Gb/s)** ** Se l'alloggio M2_1 è occupato, l'alloggio PCIE4 viene disabili- tato. ** Supporto di SSD NVMe come disco d’avvio ** Supporta kit ASRock U.2...
  • Página 72 Connettore • 1 x connettore porta COM • 1 x connettore TPM • 1 x connettore LED alimentazione e altoparlante • 1 x collettore LED RGB * Supporto totale di fino a 12V/3A, 36W strip LED • 1 x Header LED indirizzabile * Supporto totale di fino a 5V/3A, 15W strip LED • 1 x Collettore LED ventola AMD * Il collettore LED ventola AMD supporta strisce LED con un...
  • Página 73 • FCC, CE • ErP/EuP Ready (è necessaria alimentazione ErP/EuP ready) * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazi- one delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di strumenti di overclocking di terze parti.
  • Página 74 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". Jumper per azzerare la CMOS Cortocircuitato: Azzerare (CLRCMOS2) la CMOS...
  • Página 75: Header E Connettori Su Scheda

    B450 Steel Legend 1.4 Header e connettori su scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre.
  • Página 76 Connettore LED Collegare i LED alimentazione SPEAKER DUMMY alimentazione e altoparlante e l’altoparlante a questo con- l’altoparlante a questo con- a questo con- DUMMY (SPK_PLED1 a 7 pin) nettore. (vedere pag. 1, n. 16) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi sei connettori SATA3 (SATA3_1: supportano cavi dati SATA...
  • Página 77 B450 Steel Legend Header audio pannello Questo header serve a PRESENCE# anteriore collegare i dispositivi audio al MIC_RET OUT_RET (HD_AUDIO1 a 9 pin) pannello audio anteriore. (vedere pag. 1, n. 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo chassis deve supportare HDA per funzionare correttamente.
  • Página 78 Connettore ventola CPU / Questa scheda madre è dotata pompa dell'acqua di un connettore per la ventola FAN_VOLTAGE_CONTROL FAN_SPEED (CPU_FAN2/WP a 4 pin) della CPU con raffreddamento FAN_SPEED_CONTROL (vedere pag. 1, n. 5) ad acqua a 4 pin. Se si decide di collegare una ventola della CPU con raffreddamento ad acqua a 3 pin, collegarla al pin 1-3.
  • Página 79 B450 Steel Legend Collettore LED AMD FAN Il collettore LED AMD FAN (AMD_FAN_LED1 a 4 pin) viene utilizzato per collegare la 12V G R (vedere pag. 1, n. 3) prolunga LED RGB in dotazione con dissipatore di calore AMD. Il...
  • Página 80: Introducción

    1 Introducción Gracias por comprar la placa base ASRock B450 Steel Legend, una placa base fiable fabricada según el rigurosísimo control de calidad de ASRock. Ofrece un rendimiento excelente con un diseño resistente de acuerdo con el compromiso de calidad y resistencia de ASRock.
  • Página 81: Especificaciones

    ASRock. (http://www.asrock.com/) * Consulte la página 22 para acceder a la tabla de compatibilidad de frecuencias de memoria no XMP de AMD. Para obtener más información, consulte la QVL en el sitio web de ASRock. • Capacidad máxima de memoria del sistema: 64GB • Admite módulos de memoria Extreme Memory Profile (XMP) • Contacto 15μ Gold en ranuras DIMM...
  • Página 82 CPU de la serie AMD Athlon • 2 x ranuras PCI Express 3.0 x16 (PCIE1:modo x4; PCIE4:modo x2)* * Admite unidad de estado sólido de NVMe como disco de arranque * Si M2_1 está ocupado, PCIE4 se deshabilitará. • 4 x Ranuras PCI Express 2.0 x1 • Compatible con AMD Quad CrossFireX y CrossFireX ** Esta función solamente se admite con CPU de la serie Ryzen...
  • Página 83 M.2 de tipo 2230/2242/2260/2280/22110 con clave M y el módulo PCI Express M.2 hasta Gen3 x2 (16 Gb/s)** ** Si M2_1 está ocupado, PCIE4 se deshabilitará. ** Admite unidad de estado sólido de NVMe como disco de ar- ranque ** Admite el kit U.2 de ASRock...
  • Página 84 Conector • 1 x Base de conexiones de puerto COM • 1 x Conector TPM • 1 x LED de alimentación y base de conexiones para el altavoz • 1 x Cabezal de indicador LED RGB * Admite una tira de LED de hasta 12 V/3 A (36 W) en total • 1 x Base de conexiones de LED direccionable * Admite una tira de LED de hasta 5 V/3 A (15 W) en total • 1 x Base de conexiones de LED de ventilador AMD...
  • Página 85: Certificaciones

    • Preparado para ErP/EuP (se necesita una fuente de aliment- ación preparada para ErP/EuP) * Para obtener información detallada del producto, visite nuestro sitio Web: http://www.asrock.com Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de overclocking, incluido el ajuste de la BIOS, aplicando la tecnología de overclocking liberada o utilizando las herramientas...
  • Página 86: Instalación De Los Puentes

    1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los contactos, el puente queda “Corto”. Si no coloca la tapa de puente en los contactos, el puente queda “Abierto”. Puente de borrado de CMOS Corto: Borrado de CMOS (CLRCMOS2)
  • Página 87: Conectores Y Cabezales Incorporados

    B450 Steel Legend 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base.
  • Página 88 LED de alimentación y Conecte el LED de aliment- SPEAKER DUMMY base de conexiones para la ación del chasis y el altavoz del DUMMY altavoz chasis a esta base de conex- a esta base de conex- (SPK_PLED1 de 7 iones. contactos) PLED+ (consulte la pág.
  • Página 89 B450 Steel Legend Cabezal de audio del panel Este cabezal se utiliza para PRESENCE# frontal conectar dispositivos de audio MIC_RET OUT_RET (HD_AUDIO1 de 9 al panel de audio frontal. contactos) (consulte la pág. 1, nº 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1.
  • Página 90 Conector del ventilador de Esta placa base proporciona un la bomba de agua/CPU conector de ventilador de CPU de FAN_VOLTAGE_CONTROL FAN_SPEED (CPU_FAN2/WP de 4 refrigeración por agua de 4 con- FAN_SPEED_CONTROL contactos) tactos. Si tiene pensando conectar (consulte la pág. 1, nº 5) un ventilador de disipador por agua de CPU de 3 contactos, conéctelo al contacto 1-3.
  • Página 91 B450 Steel Legend Base de conexiones de LED La base de conexiones de LED de de VENTILADOR AMD VENTILADOR AMD se utiliza 12V G R (AMD_FAN_LED1 de 4 para conectar el alagador de LED contactos) RGB incluido con el disipador (consulte la pág.
  • Página 92: Комплект Поставки

    уведомления. При необходимости технической поддержки, связанной с материнской платой, посетите веб-сайт и найдите на нем информацию о модели используемой вами материнской платы. На веб-сайте ASRock также можно найти самый последний перечень поддерживаемых VGA-карт и ЦП. Веб-сайт ASRock http://www.asrock.com. 1.1 Комплект поставки...
  • Página 93: Технические Характеристики

    B450 Steel Legend 1.2 Технические характеристики Платформа • Форм-фактор ATX ЦП • Сокет AMD AM4 • Digi Power design • Система питания 6 Чипсет • AMD Promontory B450 Память • Двухканальная память DDR4 • 4 гнезда DDR4 DIMM • Процессоры AMD серии Ryzen (Matisse) поддерживают модули памяти DDR4 3200/2933/2667/2400/2133, ECC, non-ECC и...
  • Página 94 Слоты ЦП серии AMD Ryzen (Matisse, Summit Ridge и Pinnacle Ridge) расширения • 2 x слота PCI Express 3.0 x16 (PCIE1:режим x16; PCIE4:режим x4)* ЦП серии AMD Ryzen (Picasso, Raven Ridge) • 2 x слота PCI Express 3.0 x16 (PCIE1:режим x8; PCIE4:режиме...
  • Página 95 B450 Steel Legend Звук • 7.1-канальный звук высокой четкости HD Audio с защитой данных (аудиокодек Realtek ALC892/897) • Защита от перепадов напряжения в электрической сети • Изолирующее экранирование печатной платы • Отдельные слои печатной платы для левого и правого аудиоканалов • Позолоченные контакты аудиоразъемов • PCIE x1 Gigabit LAN 10/100/1000 Мбит/с...
  • Página 96 6,0 Гбит/с и модуль M.2 PCI Express до версии Gen3 x2 (16 Гбит/с)** ** Если занят слот M2_1, отключается слот PCIE4. ** Поддерживаются в качестве загрузочных SSD-диски типа NVMe ** Поддерживается комплект ASRock U.2. Разъемы • 1 колодка СОМ-порта • 1 колодка ТРМ • 1 колодка светодиодного индикатора питания и корпусного динамика...
  • Página 97 • FCC, CE • Совместимость с ErP/EuP (необходим блок питания, соответствующий стандарту ErP/EuP) * С дополнительной информацией об изделии можно ознакомиться на веб-сайте: http://www.asrock.com Следует учитывать, что разгон процессора, включая изменение настроек BIOS, применение технологии Untied Overclocking и использование инструментов разгона...
  • Página 98 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке перемычки-колпачка на контакты перемычка «замкнута». Если перемычка-колпачок на контакты не установлена, перемычка «разомкнута». Перемычка сброса Замкнута: Сброс настроек CMOS настроек CMOS Разомкнута: По умолчанию 2-контактная (CLRCMOS2) перемычка (см. стр. 1, № 19) CLRCMOS1 используется для удаления данных CMOS. Чтобы сбросить и обнулить...
  • Página 99 B450 Steel Legend 1.4 Колодки и разъемы, расположенные на системной плате Расположенные на системной плате колодки и разъемы НЕ являются перемычками. НЕ устанавливайте на эти колодки и разъемы перемычки-колпачки. Установка перемычек-колпачков на эти колодки и разъемы может вызвать неустранимое повреждение системной платы.
  • Página 100 Колодка светодиодного Предназначена для SPEAKER DUMMY индикатора питания и подключения светодиодного DUMMY динамика корпуса индикатора питания и (7-контактная, динамика корпуса. SPK_PLED1) PLED+ (см. стр. 1, № 16) PLED+ PLED- Разъемы Serial ATA3 Эти шесть разъемов (SATA3_1: SATA3 предназначены для см. стр. 1, № 9) подключения...
  • Página 101 B450 Steel Legend Аудиоколодка передней Эта колодка предназначена панели для подключения PRESENCE# MIC_RET (9-контактов, аудиоустройств к передней OUT_RET HD_AUDIO1) аудиопанели. (см. стр. 1, № 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но для е правильной работы необходимо, чтобы провод панели корпуса...
  • Página 102 Разъем для вентилятора Данная материнская плата или помпы водяного оснащена 4-контактным FAN_VOLTAGE_CONTROL охлаждения ЦП разъемом для системы FAN_SPEED FAN_SPEED_CONTROL (4-контактный водяного охлаждения ЦП. CPU_FAN2/WP) 3-контактную систему водяного (см. стр. 1, № 5) охлаждения ЦП следует подключать к контактам 1–3. Разъем питания АТХ Эта материнская плата (24-контакта, ATXPWR1) оснащена...
  • Página 103 B450 Steel Legend Колодка для подключения Колодка для подключения светодиодной подсветки светодиодной подсветки вентилятора AMD служит для вентилятора AMD. 12V G R подключения удлинительного (4-контактная, кабеля светодиодной AMD_FAN_LED1) RGB-подсветки, который (см. стр. 1, № 3) поставляется с кулером AMD. Подключив этот кабель, можно...
  • Página 104: Introdução

    1 Introdução Obrigado por adquirir a placa mãe ASRock B450 Steel Legend, uma confiável placa mãe ASRock produzida sob rigoroso controle de qualidade consistente. Esta placa principal oferece um excelente desempenho com um design robusto em conformidade com o compromisso da ASRock em fabricar produtos de qualidade e resistentes.
  • Página 105: Especificações

    ASRock para obter mais informação. (http://www.asrock.com/) * Por favor, consulte a página 22 para a tabela para suporte de frequência de memória AMD não XMP. Para mais detalhes, consulte o QVL no website da ASRock. • Capacidade máxima da memória do sistema: 64GB • Suporta módulos de memória Extreme Memory Profile (XMP)
  • Página 106 Slot de CPUs AMD Série Ryzen (Matisse, Summit Ridge e Pinnacle Ridge) expansão • 2 x Slots PCI Express 3.0 x16 (PCIE1:modo x16; PCIE4:modo x4)* CPUs AMD Série Ryzen (Picasso, Raven Ridge) • 2 x Slots PCI Express 3.0 x16 (PCIE1:modo x8; PCIE4:x4 modo)* CPUs AMD Série Athlon • 2 x Slots PCI Express 3.0 x16 (PCIE1:modo x4;...
  • Página 107 B450 Steel Legend Áudio • Áudio HD de 7.1 canais com proteção de conteúdo (Codec de áudio Realtek ALC892/897) • Suporta Proteção de Sobretensão • Blindagem de isolamento PCB • Camadas de PCB individuais por canal de áudio R/L • Fonres de Áudio Gold • LAN Gigabit 10/100/1000 Mb/s PCIE x1...
  • Página 108 M.2 PCI Express até Gen3 x2 (16 Gb/s)** ** Se M2_1 estiver ocupado, PCIE4 será desativado. ** Suporta NVMe SSD como discos de inicialização ** Suporta Kit ASRock U.2 Conector • 1 x Suporte porta COM • 1 x Plataforma TPM • 1 x LED de alimentação e Cabeçote de Autofalante...
  • Página 109: Monitor De Hardware

    • Preparada para ErP/EuP (é necessária uma fonte de ali- mentação preparada para ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site : http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramentas...
  • Página 110 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto". Apagar o Jumper CMOS Curto: Apagar CMOS (CLRCMOS2)
  • Página 111: Suportes E Conectores Onboard

    B450 Steel Legend 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe.
  • Página 112 LED de alimentação e Conecte o LED de alimen- SPEAKER DUMMY Cabeçote de Autofalante tação do chassi e o autofalante DUMMY (SPK_PLED1 de 7 pinos) do chassi a este cabeçote. (ver p.1, N.º 16) PLED+ PLED+ PLED- Conectores série ATA3 Estes seis conectores SATA3 (SATA3_1: suportam cabos de dados...
  • Página 113 B450 Steel Legend Suporte de áudio do painel Este suporte destina-se à PRESENCE# frontal conexão dos dispositivos MIC_RET OUT_RET (HD_AUDIO1 de 9 pinos) de áudio no painel de áudio (ver p.1, N.º 26) frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. O Áudio de alta definição suporta Sensor de Adaptador, mas o fio do painel no chassi deverá...
  • Página 114 Conector da ventoinha de Esta placa mãe inclui um conec- bomba de água/CPU tor de ventilador da CPU de FAN_VOLTAGE_CONTROL FAN_SPEED (CPU_FAN2/WP refrigeração a água de 4 pinos. FAN_SPEED_CONTROL de 4 pinos) Se você pretende conectar um (ver p.1, N.º 5) ventilador de refrigeração a água da CPU de 3 pinos, por favor, conecte-o ao Pino 1-3.
  • Página 115 B450 Steel Legend Cabeçote de LED FAN Cabeçote de LED FAN AMD é usado para conectar o cabo de 12V G R (AMD_FAN_LED1 de 4 extensão de LED RGB que vem pinos) com dissipador de calor AMD. (ver p.1, N.º 3) A conexão de cabo permite aos...
  • Página 116: Zawartość Opakowania

    1 Wprowadzenie Dziękujemy za zakupienie płyty głównej ASRock B450 Steel Legen, niezawodnej płyty głównej produkowanej z konsekwentnie wykonywaną przez firmę ASRock, rygorystyczną kontrolą jakości. Płyta ta zapewnia doskonałą jakość działania i solidną konstrukcję, spełniającą zobowiązanie firmy ASRock do dostarczania produktów o wysokiej jakości i wytrzymałości.
  • Página 117 * Sprawdź listę obsługiwanej pamięci na stronie internetowej ASRock w celu uzyskania dalszych informacji. (http://www.asrock.com/) * Patrz tabela obsługi częstotliwości dla pamięci non-XMP AMD znajdująca się na stronie 22. Dodatkowe informacje można znaleźć w QVL na portalu internetowym ASRock. • Maks. wielkość pamięci systemowej: 64GB • Obsługa modułów pamięci Extreme Memory Profile (XMP) • 15μ pozłacane styki w gniazdach DIMM...
  • Página 118 Gniazdo Procesor serii AMD Ryzen (Matisse, Summit Ridge oraz Pinnacle Ridge) rozszerzenia • 2 x gniazda PCI Express 3.0 x 16 (tryb PCIE1:x16 ; tryb PCIE4:x4)* Procesor serii AMD Ryzen (Picasso, Raven Ridge) • 2 x gniazda PCI Express 3.0 x 16 (tryb PCIE1:x8 ; tryb PCIE4:x4)* Procesor serii AMD Athlon • 2 x gniazda PCI Express 3.0 x 16 (tryb PCIE1:x4 ;...
  • Página 119 B450 Steel Legend Audio • Audio HD 7.1 CH z zabezpieczeniem treści (Kodek audio Realtek ALC892/897) • Obsługa zabezpieczenia przed przepięciami • Ekranowanie izolacji PCB • Indywidualne warstwy PCB dla kanału audio R/L • Pozłacane gniazda audio • 1 x PCIE Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111H...
  • Página 120 M.2 PCI Express do Gen3 x2 (16 Gb/s)** ** Jeśli jest obsadzone M2_1, gniazdo PCIE4 zostanie wyłączone. ** Obsługa SSD NVMe, jako dysków rozruchowych ** Obsługa ASRock U.2 Kit Złącze • 1 x złącze główkowe portu COM • 1 x złącze główkowe TPM • 1 x dioda LED zasilania i złącze główkowe głośnika...
  • Página 121 • Gotowość do obsługi ErP/EuP (Wymagane zasilanie z gotowością obsługi ErP/EuP) * Dla uzyskania szczegółowej informacji o produkcie, należy odwiedzić naszą stronę internetową: http://www.asrock.com Należy pamiętać, że przetaktowywanie jest związane z pewnym ryzykiem, włącznie z regulacją ustawień w BIOS, zastosowaniem Untied Overclocking Technology lub używaniem narzędzi przetaktowywania innych firm.
  • Página 122 1.3 Ustawienia zworek Ta ilustracja pokazuje ustawienia zworek. Po umieszczeniu nasadki zworki na pinach, zworka jest “Zwarta”. Jeśli nasadka zworki nie jest umieszczona na pinach, zworka jest “Otwarta”. Zworka usuwania danych Zwarcie: Usunięcie danych z pamięci CMOS z pamięci CMOS 2-pinowa zworka (CLRCMOS2) Otwarcie: Domyślne...
  • Página 123 B450 Steel Legend 1.4 Wbudowane złącza główkowe i inne złącza Wbudowane złącza główkowe i inne złącza są bezzworkowe. NIE należy umieszczać zworek nad tymi złączami główkowymi i złączami. Umieszczanie zworek nad złączami główkowymi i złączami spowoduje trwałe uszkodzenie płyty głównej.
  • Página 124 Dioda LED zasilania i złącze Podłącz to tego złącza SPEAKER DUMMY główkowe głośnika główkowego diodę LED DUMMY (7-pinowe SPK_PLED1) zasilania obudowy i głośnik (sprawdź s.1, Nr 16) obudowy . PLED+ PLED+ PLED- Złącza Serial ATA3 Te sześć złączy SATA3 (SATA3_1: obsługuje kable danych SATA sprawdź...
  • Página 125 B450 Steel Legend Złącze główkowe audio panelu To złącze główkowe służy do PRESENCE# przedniego podłączania urządzeń audio MIC_RET OUT_RET (9-pinowe HD_AUDIO1) do przedniego panelu audio. (sprawdź s.1, Nr 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio obsługuje wykrywanie gniazda, ale aby działać prawidłowo prze- wód panelu na obudowie musi obsługiwać...
  • Página 126 Złącze wentylatora pompy Ta płyta główna udostępnia wodnej /CPU 4-pinowe złącze obudowy FAN_VOLTAGE_CONTROL FAN_SPEED (4-pinowe CPU_FAN2/WP) wentylatora chłodzenia wod- FAN_SPEED_CONTROL (sprawdź s.1, Nr 5) nego CPU. Jeśli planowane jest podłączenie 3-pinowego wentyla- tora chłodzenia wodnego CPU, należy je podłączyć do pinów 1-3. Złącze zasilania ATX Ta płyta główna udostępnia (24-pinowe ATXPWR1)
  • Página 127 B450 Steel Legend Złącze główkowe LED Złącze główkowe LED wentyla- tora AMD jest używane do wentylatora AMD 12V G R podłączenia przedłużacza LED (4-pinowe AMD_FAN_LED1) RGB, dostarczonego z radia- (sprawdź s.1, Nr 3) torem AMD. Połączenie kablowe umożliwia użytkownikom wybór spośród różnych efektów światła...
  • Página 128 1 개요 ASRock B450 Steel Legend 마더보드를 구입해 주셔서 감사합니다 . 이 마더보드는 ASRock 의 일관되고 엄격한 품질관리 하에 생산되어 신뢰성이 우수합니다 . 품질과 내구성에 대한 ASRock 의 기준에 부합하는 우수한 성능과 견고한 설계를 제공합니다 . 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 설명서의 내...
  • Página 129 * 추가 정보를 원하시면 ASRock 웹사이트에 있는 메모리 지원 목록을 참조하십시오 . (http://www.asrock.com/) * AMD 비 -XMP 메모리 주파수 지원에 대한 표는 22 페이지를 참조하고 , 더 자세한 내용은 ASRock 웹사이트의 QVL 을 참조 하십시오 . • 시스템 메모리 최대 용량 : 64GB •...
  • Página 130 AMD Ryzen 시리즈 CPU(Matisse, Summit Ridge 및 Pinnacle 확장 슬롯 Ridge) • PCI Express 3.0 x16 슬롯 2 개 (PCIE1:x16 모드 , PCIE4:x4 모드 )* AMD Ryzen 시리즈 CPU(Picasso, Raven Ridge) • PCI Express 3.0 x16 슬롯 2 개 (PCIE1:x8 모드 , PCIE4:x4 모 드...
  • Página 131 B450 Steel Legend • 7.1 CH HD 오디오 콘텐츠 보호를 이용한 지원 (Realtek 오디오 ALC892/897 오디오 코덱 ) • 서비 보호 지원 • PCB 절연 차폐 • R/L 오디오 채널용 개별 PCB 레이어 • 골드 오디오 잭 : • PCIE 1 개 , Gigabit LAN 10/100/1000 Mb/s •...
  • Página 132 Gen3 M.2 PCI Express 모듈을 2 개 (16 Gb/s) 까지 지원 ** ** M2_1 이 사용 중일 경우 , PCIE4 가 비활성화됩니다 . ** NVMe SSD 를 부팅 디스크로 사용 가능하도록 지원 ** ASRock U.2 키트 지원 • COM 포트 헤더 1 개 커넥터...
  • Página 133 인증 • ErP/EuP 사용 가능 (ErP/EuP 사용 가능 전원공급장치 필요 ) * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 . http://www.asrock.com BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체의 오버 클로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위험이 따른다는...
  • Página 134 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . Clear CMOS 점퍼 단락 : Clear CMOS (CLRCMOS2) 단선 : 기본값 2 핀 점퍼 (1 페이지 , 19 번 항목 참조 ) CLRCMOS1 을...
  • Página 135 B450 Steel Legend 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마 십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩니다 . 섀시의 전원 스위치 , 리셋 스 시스템 패널 헤더...
  • Página 136 전원 LED 및 스피커 헤더 섀시 전원 LED 와 섀시 스피커 SPEAKER DUMMY (7 핀 SPK_PLED1) 를 이 헤더에 연결하십시오 . DUMMY (1 페이지 , 16 번 항목 참조 ) PLED+ PLED+ PLED- 시리얼 ATA3 커넥터 이들 6 개의 SATA3 커넥터는 (SATA3_1: 최대...
  • Página 137 B450 Steel Legend 전면 패널 오디오 헤더 이 헤더는 오디오 장치를 전면 PRESENCE# (9 핀 HD_AUDIO1) MIC_RET 오디오 패널에 연결하는 데 사 OUT_RET (1 페이지 , 26 번 항목 참조 ) 용됩니다 . OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와이어...
  • Página 138 CPU/ 워터 펌프 팬 커넥터 이 마더보드에는 4 핀 수냉식 (4 핀 CPU_FAN2/WP) CPU 팬 커넥터가 탑재되어 있습 FAN_VOLTAGE_CONTROL FAN_SPEED (1 페이지 , 5 번 항목 참조 ) 니다 . 3 핀 CPU 수냉식 쿨러 팬 FAN_SPEED_CONTROL 을 연결하려는 경우 핀 1-3 에 연 결하십시오...
  • Página 139 B450 Steel Legend AMD 팬 LED 헤더 AMD 팬 LED 헤더는 AMD 방열판 (4 핀 AMD_FAN_LED1) 과 함께 제공되는 RGB LED 연장 12V G R (1 페이지 , 3 번 항목 참조 ) 케이블을 연결하는 데 사용됩니 다 . 케이블 연결에서 사용자는 다...
  • Página 140 ブサイ トでは、 最新の VGA カードおよび CPU サポート一覧もご覧になれます。 ASRock ウェブサイ ト http://www.asrock.com. 1.1 パッケージの内容 • ASRock B450 Steel Legend マザーボード (ATX フォームファクタ) • ASRock B450 Steel Legend クイックインストールガイ ド • ASRock B450 Steel Legend サポート CD • 1 x I/O パネルシールド...
  • Página 141 PRO CPU のみに対応します。 * 詳細については、 ASRock ウェブサイ トのメモリーサポート一 覧を参照してく ださい。 (http://www.asrock.com/) * AMD の非 XMP メモリ周波数サポートについては、 22 ページ の表を参照してく ださい。 詳細については、 ASRock の Web サイ トの QVL を参照してく ださい。 • システムメモリの最大容量 : 64GB • Extreme Memory Profile (XMP) メモリモジュールに対応しま す...
  • Página 142 AMD Ryzen シリーズ CPU (Matisse、 Summit Ridge および 拡張スロッ ト Pinnacle Ridge) • 2 x PCI Express 3.0 x16 スロッ ト (PCIE1 : x16 モード、 PCIE4 : x4 モード )* AMD Ryzen シリーズ CPU (Picasso、 Raven Ridge) • 2 x PCI Express 3.0 x16 スロッ ト (PCIE1 : x8 モード、 PCIE4 : x4 モード)...
  • Página 143 B450 Steel Legend • 7.1 CH HDオーディオ、 コンテンツプロテクション付き (Realtek オーディオ ALC892/897 オーディオコーデック) • サージ保護に対応 • PCB 絶縁シールド • R/L オーディオチャンネル用個別 PCB レイヤ • ゴールドオーディオジャック • PCIE x1 ギガビッ ト LAN 10/100/1000 Mb/ 秒 • Realtek RTL8111H • Wake-On-LAN (ウェイク オン ラン) に対応...
  • Página 144 と最大 Gen3 x2 (16 Gb/s) までの M.2 PCI Express モジュー ルに対応 ** ** M2_1 が使用されている場合は、 PCIE4 は無効になります。 ** 起動ディスク として NVMe SSD に対応 ** ASRock U.2 キッ トに対応 • 1 x COM ポートヘッダー コネクタ • 1 x TPM ヘッダー • 1 x 電源 LED とスピーカーヘッダー...
  • Página 145 • 電圧監視 : +12V、 +5V、 +3.3V、 Vcore • Microsoft® Windows® 10 64-bit 認証 • FCC、 CE • ErP/EuP Ready ( ErP/EuP 対応電源供給装置が必要です) * 商品詳細については、 当社ウェブサイ トをご覧く ださい。 http://www.asrock.com BIOS 設定の調整、 アンタイ ドオーバークロックテク ノロジーの適用、 サードパーティのオー バークロックツールの使用などを含む、 オーバークロックには、 一定のリスクを伴いますの でご注意く ださい。 オーバークロックするとシステムが不安定になったり、 システムのコン ポーネントやデバイスが破損するこ とがあります。 ご自分の責任で行ってく ださい。 弊社で...
  • Página 146 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピン に被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被さっ ていない場合には、 ジャンパーは 「オープン」 です。 CMOS クリアジャンパー ショート : CMOS のクリア (CLRCMOS2) オープン : デフォルト 2 ピンジャンパー (p.1、 No. 19 参照) CLRCMOS1 は、 CMOS のデータをクリアするこ とができます。 クリアして、 デフォルト 設定にシステムパラメーターをリセッ トするには、 コンピューターの電源を切り、 電源 から電源コードを抜いてく...
  • Página 147 B450 Steel Legend 1.4 オンボードのヘッダーとコネクタ オンボードヘッダーとコネクタはジャンパーではありません。 これらヘッダーとコネクタに はジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクタにジャンパーキャッ プを被せると、 マザーボードに物理損傷が起こるこ とがあります。 システムパネルヘッダー 電源スイッチを接続し、 ス PLED+ PLED- (9 ピン PANEL1) イッチをリセッ トし、 下記のピ PWRBTN# (p.1、 No. 15 参照) ン割り当てに従って、 シャー シのシステムステータス表示 ランプをこのヘッダーにセッ RESET# HDLED- トします。 ケーブルを接続す HDLED+ るときには、 ピンの+と−に...
  • Página 148 電源 LED とスピーカーヘ シャーシ電源 LED とシャー SPEAKER DUMMY ッダー シスピーカーをこのヘッダー DUMMY (7 ピン SPK_PLED1) に接続してく ださい。 (p.1、 No. 16 参照) PLED+ PLED+ PLED- シリアル ATA3 コネクタ これら6 つの SATA3コネクター は、 最高 6.0 Gb/ 秒のデータ転 (SATA3_1: p.1、 No. 9 参照) 送速度で内部ストレージデバ イス用の...
  • Página 149 B450 Steel Legend フロントパネルオーディ このヘッダーは、 フロントオー PRESENCE# オヘッダー ディオパネルにオーディオデ MIC_RET OUT_RET (9 ピン HD_AUDIO1) バイスを接続するためのも (p.1、 No. 26 参照) のです。 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. ハイディフィニションオーディオはジャックセンシングをサポートしていますが、 正し く機能するためには、 シャーシのパネルワイヤーが HDA をサポートしているこ とが 必要です。 お使いのシステムを取り付けるには、 当社のマニュアルおよびシャーシの マニュアルの指示に従ってく ださい。 2. ACʼ97 オーディオパネルを使用する場合には、 次のステップで、 前面パネルオーディ...
  • Página 150 このマザーボードは 4 ピン水 CPU/ウォーターポンプフ ァンコネクタ 冷却 CPU ファンコネクタが装 FAN_VOLTAGE_CONTROL FAN_SPEED (4 ピン CPU_FAN2/WP) 備されています。 3 ピンの CPU FAN_SPEED_CONTROL (p.1、 No. 5 参照) 水冷却ファンを接続する場合 には、 ピン 1-3 に接続してく だ さい。 ATX 電源コネクタ このマザーボードは 24 ピン (24 ピン ATXPWR1) ATX 電源コネクタが装備され (p.1、 No. 7 参照) ています。...
  • Página 151 B450 Steel Legend AMD ファン LED ヘッ AMD ファン LED ヘッダーを使 用して AMD ヒートシンクに付属 ダー 12V G R している RGB LED 延長ケーブ (4 ピン AMD_FAN_ ルを接続します。 ケーブルを接 LED1) 続すれば、 ユーザーはさまざま (p.1、 No. 3 参照) な LED ライティ ング効果を選択 できます。 注意 : ファン LED ケーブルは間...
  • Página 152 会另外进行通知。如果您需要与此主板相关的技术支持,请访问我们的网站以具体 了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。 华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 B450 Steel Legend 主板(ATX 规格尺寸) • 华擎 B450 Steel Legend 快速安装指南 • 华擎 B450 Steel Legend 支持光盘 • 1 x I/O 面板 • 2 x 串行 ATA (SATA) 数据线(选购)...
  • Página 153 B450 Steel Legend 1.2 规格 • ATX 规格尺寸 平台 • AMD AM4 Socket • Digi Power design • 6 电源相设计 • AMD Promontory B450 芯片集 • 双通道 DDR4 内存技术 内存 • 4 x DDR4 DIMM 槽 • AMD Ryzen 系列 CPU (Matisse) 支持 DDR4 3200/2933/2667/2400/2133 ECC 及非...
  • Página 154 * 支持 NVMe SSD 用作启动盘 * 如果 M2_1 被占用,PCIE4 将被禁用。 • 4 x PCI Express 2.0 x1 槽 • 支持 AMD Quad CrossFireX 和 CrossFireX ** 仅 Ryzen 系列 CPU(Matisse、Summit Ridge、Pinnacle Ridge、Picasso 和 Raven Ridge)支持此功能。 • Ryzen 系列 APU 中的集成 AMD Radeon Vega 系列图形...
  • Página 155 B450 Steel Legend • 1 x PS/2 鼠标 / 键盘端口 后面板 I/O • 1 x HDMI 端口 • 1 x DisplayPort 1.2 • 1 x 光学 SPDIF 输出端口 • 2 x USB 2.0 端口 ( 支持 ESD 保护 ) • 1 x USB 3.2 Gen2 A 类型端口 (10 Gb/s)(支持 ESD 保护)...
  • Página 156 • 1 x COM 端口接脚 接口 • 1 x TPM 接脚 • 1 x 电源 LED 和扬声器接脚 • 1 x RGB LED 接头 * 总共支持最高 12V/3A, 36W LED 灯条 • 1 x 可寻址 LED 接脚 * 总共支持最高 5V/3A, 15W LED 灯条 •...
  • Página 157 B450 Steel Legend • FCC、CE 认证 • ErP/EuP 支持(需要支持 ErP/EuP 的电源) * 有关详细产品信息,请访问我们的网站:http://www.asrock.com 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”,或使用第 三方超频工具。超频可能会影响到系统的稳定性,甚至对系统的组件和设备造成损坏。 执行这项工作您应自担风险和费用。我们对由于超频而造成的损坏概不负责。...
  • Página 158 1.3 跳线设置 此图显示如何设置跳线。将跳线帽装到这些针脚上时,跳线 “短接”。如果这 些针脚上没有装跳线帽,跳线 “开路”。 清除 CMOS 跳线 短接 : 清除 CMOS (CLRCMOS2) 开路 : 默认 2 针跳线 (见第 1 页,第 19 个) CLRCMOS1 允许您清除 CMOS 中的数据。要清除和重置系统参数到默认设置, 请关闭计算机,从电源上拔下电源线插头。等候 15 秒后,使用跳线帽将 CLRCMOS1 的针脚短接 5 秒。但是,请勿在更新 BIOS 后立即清除 CMOS。 如果您需要在刚完成 BIOS 更新后清除 CMOS,则必须先启动系统,并在关闭后再 执行清除...
  • Página 159 B450 Steel Legend 1.4 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。 将跳线帽装到这些接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配,将机 PLED+ PLED- (9 针 PANEL1) 箱上的电源开关、重置开关 PWRBTN# (见第 1 页,第 15 个) 和系统状态指示灯连接到此 接脚。在连接线缆前请记下 RESET# 正负针脚。 HDLED- HDLED+ PWRBTN(电源开关): 连接到机箱前面板上的电源开关。您可以配置使用电源开关关闭系统的方式。 RESET(重置开关): 连接到机箱前面板上的重置开关。如果计算机死机,无法执行正常重新启动,按 重置开关重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系 统处在 S3 睡眠状态时,此 LED 闪烁。系统处在 S4 睡眠状态或关机 (S5) 时,此...
  • Página 160 电源 LED 和扬声器接脚 请将机箱电源 LED 和机箱 SPEAKER DUMMY (7 针 SPK_PLED1) 扬声器连接到此接脚。 DUMMY (见第 1 页,第 16 个) PLED+ PLED+ PLED- 串行 ATA3 接口 这六个 SATA3 接口支持最 (SATA3_1: 高 6.0 Gb/s 数据传输速率的 见第 1 页, 第 9 个) 内部存储设备的 SATA 数据 (SATA3_2: 线。...
  • Página 161 B450 Steel Legend 前面板音频接脚 此接脚用于将音频设备连接 PRESENCE# (9 针 HD_AUDIO1) MIC_RET 到前音频面板。 OUT_RET (见第 1 页,第 26 个) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。请 按照我们的手册和机箱手册的说明安装系统。 2. 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚: A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。...
  • Página 162 CPU/ 水泵风扇接口 此主板提供 4 针水冷风扇接 (4 针 CPU_FAN2/WP) 口。如果您打算连接 3 针 FAN_VOLTAGE_CONTROL FAN_SPEED (见第 1 页, 第 5 个) CPU 水冷风扇,请将它连接 FAN_SPEED_CONTROL 到针脚 1-3。 ATX 电源接口 此主板提供 24 针 ATX 电源接 (24 针 ATXPWR1) 口。要使用 20 针 ATX 电源, (见第 1 页,第 7 个) 请沿针脚...
  • Página 163 B450 Steel Legend AMD 风扇 LED 接脚 AMD 风扇 LED 接脚用于连接 (4 针 AMD_FAN_LED1) AMD 散热器附带的 RGB LED 12V G R (见第 1 页,第 3 个) 延长线。连接线缆可以让用户 选择不同的 LED 灯光效果。 注意:风扇 LED 线安装方向切 勿错误,否则,线缆会损坏。 RGB LED 接脚 此接脚用于连接 RGB LED 延长...
  • Página 164 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准 规定的限量要求,然该部件仍符合欧盟指令...
  • Página 165 本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的特定資訊。您也 可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。 華擎網站 http://www.asrock.com. 1.1 包裝內容 • 華擎 B450 Steel Legend 主機板(ATX 尺寸) • 華擎 B450 Steel Legend 快速安裝指南 • 華擎 B450 Steel Legend 支援光碟 • 1 x I/O 面板外罩 • 2 x Serial ATA (SATA) 資料纜線(選用)...
  • Página 166 * 若使用 Ryzen 系列 CPU (Picasso 及 Raven Ridge),僅 PRO CPU 支援 ECC。 * 如需更多資訊,請參閱華擎網站上的記憶體支援表。(http:// www.asrock.com/) * 如需 AMD 非 XMP 記憶體頻率支援的資料表,請參閱第 22 頁。如需更詳細的資訊,請參閱 ASRock 網站上的 QVL。 • 最大系統記憶體容量: 64GB • 支援 Extreme Memory Profile (XMP) 記憶體模組 • 15μ 特厚鍍金插槽 AMD Ryzen 系列 CPU (Matisse、Summit Ridge 及...
  • Página 167 B450 Steel Legend * 支援 NVMe SSD 作為開機磁碟 * 若已佔用 M2_1,將會停用 PCIE4。 • 4 x PCI Express 2.0 x1 插槽 • 支援 AMD Quad CrossFireX 及 CrossFireX ** 僅 Ryzen 系列 CPU (Matisse、Summit Ridge、Pinnacle Ridge、Picasso 及 Raven Ridge) 支援此功能。 • 整合式 AMD Radeon Vega Series Graphics 內建於...
  • Página 168 • 1 x PS/2 滑鼠/鍵盤連接埠 後面板 I/O • 1 x HDMI 連接埠 • 1 x DisplayPort 1.2 • 1 x 光纖 SPDIF 輸出連接埠 • 2 x USB 2.0 連接埠(支援靜電保護) • 1 x USB 3.2 Gen2 A 類型連接埠 (10 Gb/s) (支援靜電保 護)...
  • Página 169 B450 Steel Legend • 1 x COM 連接埠排針 接頭 • 1 x TPM 排針 • 1 x 電源 LED 及喇叭排針 • 1 x RGB LED 排針 * 總計最高支援 12V/3A,36W LED 條燈 • 1 x 可定址 LED 排針 * 總計最高支援 5V/3A,15W LED 條燈...
  • Página 170 • 靜音風扇(依 CPU 溫度自動調整機殼風扇速度): CPU、CPU / 水冷幫浦、機殼 / 水冷幫浦風扇 • 風扇多重速度控制:CPU、CPU / 水冷幫浦、機殼 / 水冷 幫浦風扇 • 電壓監控: +12V、+5V、+3.3V、Vcore • Microsoft® Windows® 10 64-bit 作業系統 • FCC、CE 認證 • ErP/EuP ready(須具備 ErP/EuP ready 電源供應器) * 如需產品詳細資訊,請上我們的網站:http://www.asrock.com 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、 採用自由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定性, 或者甚至會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成本。 我們對於因超頻所造成的可能損害概不負責。...
  • Página 171 B450 Steel Legend 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時,該跳線為「短路」。若沒有 跳線帽套在針腳上,該跳線為「開啟」。 清除 CMOS 跳線 短路: 清除 CMOS (CLRCMOS2) 2-pin 跳線 開啟: 預設 (請參閱第 1 頁,編號 19) 您可利用 CLRCMOS1 清除 CMOS 中的資料。若要清除及重設系統參數為預設設 定,請先關閉電腦電源,再拔下電源供應器的電源線。在等待 15 秒後,請使用 跳線帽讓 CLRCMOS1 上的 pin 短路約 5 秒。不過,請不要在更新 BIOS 後立即清 除 CMOS。若您需在更新 BIOS 後立即清除 CMOS,則必須先重新啟動系統,然...
  • Página 172 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽套在排 針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排列將機 PLED+ PLED- (9-pin PANEL1) 殼上的電源開關、重設開關及 PWRBTN# (請參閱第 1 頁,編號 15) 系統狀態指示燈連接至此排 針。在連接纜線之前請注意正 RESET# 負針腳。 HDLED- HDLED+ PWRBTN ( 電源開關 ): 連接至機殼前面板上的電源開關。您可設定使用電源開關關閉系統電源的方式。 RESET ( 重設開關 ): 連接至機殼前面板上的重設開關。若電腦凍結且無法執行正常重新啟動,按下重 設開關即可重新啟動電腦。 PLED ( 系統電源 LED): 連接至機殼前面板上的電源狀態指示燈。系統正在運作時,此 LED 會亮起。系 統進入...
  • Página 173 B450 Steel Legend 電源 LED 及喇叭排針 請將機殼電源 LED 及機殼喇 SPEAKER DUMMY (7-pin SPK_PLED1) 叭連接至此排針。 DUMMY (請參閱第 1 頁,編號 16) PLED+ PLED+ PLED- Serial ATA3 接頭 這六組 SATA3 接頭皆支援內 (SATA3_1: 部儲存裝置的 SATA 資料纜 請參閱第 1 頁,編號 9) 線,最高可達 6.0 Gb/s 資料傳...
  • Página 174 前面板音訊排針 本排針適用於連接音訊裝置 PRESENCE# MIC_RET (9-pin HD_AUDIO1) 至前面板音訊。 OUT_RET (請參閱第 1 頁,編號 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必須支 援 HDA 才能正確運作。請依本手冊及機殼手冊說明安裝系統。 2. 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針: A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。 C.
  • Página 175 B450 Steel Legend CPU /水冷幫浦風扇接頭 本主機板配備 4-Pin 水冷 CPU (4-pin CPU_FAN2/WP) 風扇接頭。若您計畫連接 3-Pin FAN_VOLTAGE_CONTROL FAN_SPEED (請參閱第 1 頁, 編號 5) CPU 水冷風扇,請接至 Pin FAN_SPEED_CONTROL 1-3。 ATX 電源接頭 本主機板配備一組 24-pin ATX (24-pin ATXPWR1) 電源接頭。若要使用 20-pin (請參閱第 1 頁,編號 7) ATX 電源供應器,請插入 Pin 1 及...
  • Página 176 AMD FAN LED 排針 AMD FAN LED 排針用於連接 (4-pin AMD_FAN_LED1) AMD 散熱器隨附的 RGB LED 延 12V G R (請參閱第 1 頁,編號 3) 長線。纜線連接允許使用者選擇 各種 LED 照明效果。 警告: 切勿以錯誤方向安裝 FAN LED 纜線,否則纜線可能損壞。 RGB LED 排針 此排針用於連接 RGB LED 延長 (4-pin RGB_LED1) 線,可供使用者選擇各種...
  • Página 177 * Untuk CPU Seri Ryzen (Picasso dan Raven Ridge), ECC hanya didukung dengan CPU PRO. * Lihat Daftar Dukungan Memori di situs web ASRock untuk informasi selengkapnya. (http://www.asrock.com/) * Silakan lihat halaman 22 untuk table dukungan frekuensi memo- ru non-XMP AMD. Untuk rincian selengkapnya, silakan lihat QVI di situs web ASRock.
  • Página 178 Slot Ekspansi CPU Seri AMD Ryzen (Matisse, Summit Ridge, dan Pinnacle Ridge) • 2 x Slot PCI Express 3.0 x16 (PCIE1:x16 mode; PCIE4:x4 mode)* CPU Seri AMD Ryzen (Picasso, Raven Ridge) • 2 x Slot PCI Express 3.0 x16 (PCIE1:x8 mode; PCIE4:x4 mode)* CPU Seri AMD Athlon • 2 x Slot PCI Express 3.0 x16 (PCIE1:x4 mode;...
  • Página 179 B450 Steel Legend Audio • Audio HD 7.1 CH dengan Perlindungan Konten (Realtek ALC892/897 Audio Codec) • Mendukung Perlindungan dari Lonjakan Arus • Pelindung Terisolasi PCB • Lapisan PCB Individual untuk Saluran Audio Ka/Ki • Soket Audio Emas • 1 x PCIE Gigabit LAN 10/100/1000 Mb/s • Realtek RTL8111H...
  • Página 180 M.2 PCI Express hingga Gen3 x2 (16 Gb/s)** ** Jika M2_1 digunakan, maka PCIE4 akan dinonaktifkan. ** Mendukung SSD NVMe sebagai disk boot ** Mendukung Kit ASRock U.2 Konektor • 1 x Header Port COM • 1 x Header TPM • 1 x Header LED Daya dan Speaker...
  • Página 181 • Mendukung ErP/EuP (memerlukan catu daya untuk ErP/ EuP) * Untuk informasi rinci tentang produk, kunjungi situs web kami: http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat bantu overclocking pihak ketiga.
  • Página 182: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
  • Página 183: Declaration Of Conformity

    Address: Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product Product Name : Motherboard B450 Steel Legend Model Number : Conforms to the following speci cations: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: is device complies with part 15 of the FCC Rules. Operation is subject to the...
  • Página 184: Eu Declaration Of Conformity

    EU Declaration of Conformity For the following equipment: Motherboard (Product Name) B450 Steel Legend / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) EMC —Directive 2014/30/EU (from April 20th, 2016)

Tabla de contenido