Setting The Language - National Geographic 274NE Manual De Instrucciones

274 NE
4 Radio Controlled Clock (RCC)
The RCC has the most accurate time within the
continent. This unit receives the time signal
transmitted by Physikalisch-Technische
Bundesanstalt (PTB) of Germany, which is
regulated by 4 atomic clocks and in average
deviates less than 1 second in 2 million years.
PTB transmits the time signal (DCF77, 77.5kHz)
continuously from Mainflingen, 25 km southeast
of Frankfurt (am Main). It is expected that the
signal can cover a distance of 2,000 km from the
transmitter. However, some environmental
effects may affect the transmitting distance.
For more information please see www.ptb.de
With all wireless devices, the receiving ability
may be affected by, but not limited to, the
following, therefore for best accuracy avoid the
following situations:
• Long transmitting distance
• Nearby mountains and valleys
• Among tall buildings
• Near railway, high voltage cable, etc.
• Near freeway, airport, etc.
• Near construction site
4.1 Wave Signal Reception
As long as the batteries are supplying power to the clock, the clock will receive the time signal and
adjust the time automatically. No manual adjustment is required after power up. Accurate adjustment
of the clock based on the time signal is supported in the continental Europe.
The monitor automatically receives the time signal everyday at 1:00am and makes any required
adjustment to the time setting, indicated by the flashing icon
If the time signal is successfully received the
flashing.
Important: Do not press any button while the wave signal reception is in progress.
4.2 Triggering a Wave Signal Reception Manually
You can trigger a wave signal reception at any time by pressing the WAVE - button
4.3 Unsuccessful Wave Signal Reception
If the automatic updates are unsuccessful, the wave on top of the antenna tower and
disappear. The unit will try to receive the signal for 10 minutes every hour until successful reception.
5 Operation
5.1

Setting the language

The day can be displayed in 4 different languages (English/French/German/Italian).
In stand-by:
• Press the SET- button
• A double beep confirms that you entered the setting mode.
• Press the + or - button
• Press the SET- button
All manuals and user guides at all-guides.com
•
•
•
•
•
OK
for 3 seconds.
to change the display language.
to confirm. The year is flashing on the display.
IS
NO
DK
IE UK
NL
DE
BE
LU
OK
CH
FR
ES
PT
TN
Inside concrete buildings
Near electrical appliances
Bad weather
Inside moving vehicles
Nearby metallic structures
.
icon will appear and the RCC icon
FI
SE
EE
LV
LT
BY
PL
CZ
UA
SK
MD
AT
HU
SI
RO
HR
BA
YU
IT
BG
MK
AL
EL
TR
MT
SY
CY
LB
IL JO
will stop
OK
.
will
GE