Color Settings - Steren COM-437 Manual Del Usuario

B/W / Color
This option allows you to view the images from the cameras in
black & white or in color. (As long as the cameras that are being
used have color capabilities)
Sequence time setting
Allows you to confi gure the time that passes between the
visualization of one camera and the next in sequence mode.
Camera speed setting
Use this option in order to change the camera's speed
depending on the speed of your computer and video card.
4 fps: views the image at 4 frames per second
5 fps: views the image at 5 frames per second
6 fps: views the image at 6 frames per second
7 fps: views the image at 7 frames per second
OSD
Use this option in order to change the name of each of the
cameras according to your needs.
Select the camera to be renamed and in the bottom area, input
the desired name.

Color Settings

Allows you to adjust the brightness, contrast, tint, saturation, and
clarity for all the cameras.
If you click default, the modifi cations that may have been made
will have no effect and the default parameters will be set.
Click OK in order to save the changes.
Click CANCEL in order to exit without saving any changes.
ENGLISH-20