Miniland scaly up Manual Del Usuario página 9

ENGLISH
5.2 OPERATIONS
1. Press the "On/Off" (5) button to turn on the weighing scale.
2. Press the "On/Off" (5) button again to select the weight measurement unit between "lb & oz" or
"kg" whilst all the digits of the display screen are turned on.
3. The final weight result will appear on the LCD screen (4). A few seconds later, the display will
mark "0.00" (kg/lb & oz). When both the "0.00" (kg/lb & oz) signal and the " " signals appear, the
weighing scale will be ready to use.
4. The Tare function allows the elimination of the weight of any accessories such as towels or
blankets so as not to distort the measurement if you weight the baby with them. To use it, firstly
weight these objects and press the Tare button (6). From this time onwards the weighing scale
will only record the baby's weight when the latter is placed on it. This function will be voided if the
weight of the accessories exceeds 0.5 kg.
5. Place the baby on the weighing scale when "0.00" (kg/ lb & oz) appears in the display.
6. During the weighing process, the figures will flash. The final weight will be that marked on the
display when it stops flashing.
7. Before weighing anything else, firstly take the baby off the weighing scale, press the "HOLD"
button until "0.00 kg" appears on the screen.
8. The weighing scale will be turned off automatically after 40 seconds.
Note: Do not place anything on the weighing scale before turning it on.
5.3 TRAY CHANGE
To change the tray, follow the steps below:
1. Turn the jog wheel (8) which is situated below the weighing scale to the OPEN position.
2. Take off the tray placed on the weighing scale put the one on which you wish to use.
3. Once the new tray has been correctly adjusted, turn the jog wheel (8) again to the CLOSE
position.
1
2
9