Light Bulb Installation; Fan Operating Instructions - allen+roth DEXTER Manual Del Usuario

LIGHT BULB INSTALLATION

1. Install bulbs (G). (Fig. 1)

FAN OPERATING INSTRUCTIONS

1. Restore electrical power to the outlet box by
turning the electricity on at the main fuse box.
(Fig.1)
WARNING
Check to see that all connections are
tight, including ground, and that no bare
wire is visible at the wire connectors,
except for the ground wire. Do not
operate fan until the blades are in place.
Noise and fan damage could result.
2. To make fan operational, install 12-volt battery
(included) in remote (H). Store the remote
away from excessive heat or humidity. (Fig. 2)
1
1
2
13
G
ON ON
ON ON
ON ON
ON ON
H
12V BATTERY
A