Product Assembly - KitchenAid KCG8433 Manual Del Usuario

PRODUCT ASSEMBLY

First, clean all parts and accessories. (See "Care and Cleaning" section). Place the product on
a dry, flat, level surface such as a countertop or table.
1
2
1
Place the Top hopper onto the machine
with the 'Lock icon' facing front. Rotate the
Top hopper until it clicks into place.
Add whole coffee beans. Place the Top
hopper lid onto the Top hopper.
3
For grinding into a Portafilter:
Remove the Grounds catcher tray and
then remove the Portafilter holder from its
storage location. Insert Portafilter holder
into Portafilter holder guide.
Replace the Grounds catcher tray.
5
For grinding into the Portafilter: If using
a commercial Portafilter (58 mm), insert it
into the middle guides of Portafilter holder.
W11312158A.indb 5 W11312158A.indb 5
2
1
2
For grinding into the Bottom hopper:
Open the Rubber stopper and slide the
Bottom hopper into position.
4
For grinding into the Portafilter:
If using a standard residential Portafilter
(54 mm), insert it along the top guides of
the Portafilter holder.
5
1/6/2020 5:56:36 PM 1/6/2020 5:56:36 PM