SPECIFICATIONS
The technical characteristics and accessories included may be subject to change depending on the
product version.
Net weight :
Gross weight :
Maximum weight supported::
Minimum weight supported::
Maximum Speed* :
Maximum Autonomy* :
Minimum turning radius:
Battery Type:
Engine Type :
Battery Voltage :
Battery Capacity :
Power requirements:
Foldable size:
Open size :
Wheel type :
Whell size :
Brake type :
HOW TO CONNECT THE HANDLEBARS TO THE MAIN STRUCTURE TUBE
Grasp the handles, placing them in the appropriate jacks, turning them in the correct direction
WRONG WAY
TO THE CLOCK NEEDLES
NOTE: If the handlebar bars do not adjust correctly to frame, you may need to change the location
of your accelerator and brake assembly appropriately.
Tighten or loosen the throttle and brake assembly with the included hex wrench and make sure they
are not touching or blocking the handlebar grip.
HOW TO FOLD YOUR E-SCOOTER.
Push and hold the release lever near the front of the footrest, according to the figure below and lift
the handlebar to unfold it or pull them down to bend them.
You will hear a click in both directions, this means that it is now locked in place.
The handlebar has a platen, attached to the central tube of the handlebar, which serves to lock your
e-scooter once folded
8.8kg
9.8kg
120 kg
20 kg
24 km/h max.
10 km max.
0°
Litio
Brushless
25.2V
4.0 Ah
AC 100-240 V, 50-60 Hz
(106*41.7*30
cm)
(96*41.7*106
cm) without tires.
Solid tire
5 Inches Electronic
Front: Electric / Rear: Mechanical
RIGHT WAY
TO THE CLOCK
NEEDLESS
11