Technical Data; Product Features - Bosch AXT RAPID 2000 Manual Original

Do not attempt to repair the machine unless you are
qualified to do so.
Do not allow processed material to build up in the
discharge zone; this may prevent proper discharge
which can result in kickback of material through the
feed intake.
If the machine becomes clogged, switch off and al-
low the cutter to stop. Remove the plug from the
mains supply before clearing debris.
Keep all guards and deflectors in place and in good
working condition.
Do not tamper with the motor speed control settings.
Contact a Bosch approved service agent if a prob-
lem exists.
Keep the motor cooling vents clean of debris and
other accumulations to prevent damage to the motor
or possible fire.
Do not transport the machine while the motor is run-
ning.
Switch off, allow the cutter to stop and remove the
plug from the mains supply whenever you leave the
work area.
Do not tilt the machine while it is running.

Technical data

Shredder
Part number (typ)
Rated power, S 6 (4/6 min)
Rated power, S 1
No-load speed
2)
Capacity max.
Branch diameter, max.
Weight, approx.
Protection class
Serial Number
1)
The S 6 operating mode (40 %) indicates a load profile of 4 min load and 6 min idle time. For practical application, con-
tinuous operation is permitted.
2)
depending on the hardness of the wood

Product Features

1 Feed intake
2 On/Off switch
3 Securing knob
4 Mains plug**
5 Ventilation slots
6 Undercarriage
7 Collection bag *
8 Discharge chute
13 • F 016 L70 461 • TMS • 23.11.10
1)
2)
Maintenance and storage
– When the machine is stopped for servicing, in-
spection, or storage, or to change an accessory,
switch off and remove the plug from the mains
supply and allow the machine to cool. Make sure
that all moving parts have come to a complete
stop before making any inspections, adjustments,
etc.
– Maintain the machine with care and keep it clean.
– Replace worn or damaged parts for safety. En-
sure all replacement parts are Bosch Approved.
– If an extension cord is used it shall not be of
lighter grade than the supply cord already fitted to
the machine.
– Check the supply and any extension cord regu-
larly for damage or signs of ageing.
Do not use the machine, if the cords are dam-
aged.
– When servicing the cutter be aware that, even
though the motor will not start due to the interlock
feature of the guard, the cutter can still be moved
if the motor is turned by hand.
– Never attempt to override the interlock feature of
the guard.
AXT Rapid 2000
3 600 H53 5..
[W] 2000
[W] 1800
-1
[min ] 3650
[kg/h] 80
[mm] 35
[kg] 11.5
/ II
See serial No 10 (rating plate) on machine.
9 Hooks for collecting bag
10 Serial Number
11 Cover
12 Allen Key
13 Prodder
*Optional accessory
**Country specific
*Not all of the accessories illustrated or described are
included as standard delivery.
English - 2
AXT Rapid 2200
3 600 H53 6..
2200
2000
3650
90
40
12
/ II