Mannesmann 99448 Instrucciones Para El Manejo página 20

Changing the battery

As soon, as the display shows "
battery has to be changed.

Switch the multimeter "OFF" and plug-off
the test prods.

Open the backside of the instrument and
take out the worn-out battery.

Remove the push-button connection
from the worn-out battery and fasten on
the new battery (9V-Block / 6F22).

Place the new battery into the housing
and close the backside of the instrument
securely.
Attention: According to the battery-regula-
tions you have to dispose defect or worn-out
batteries through your local trade or through
national battery-collecting systems.
Contravention will be punished as infringe-
ment by fine.
Changing the fuse

In case the fuse is blown due to overload
or operating error, open the backside of
the multimeter, take out the battery and
remove the push-button connector.

Remove the defect fuse and replace by
a new one of the same type.

The unit contains two fuses:
F1: 250 mA/300 V F
F2: 10 A/300 V F
2 years warranty
The warranty-period begins at the date of
purchase. Please include your original
receipt when sending the unit for repair.
", the