Kenmore 116.33720 Manual Del Propietário página 20

SOME MODELS
CAUTION
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supplybefore
servicing or cleaning the unit. Failure
to do so could result in electricalshock
or personal injuryfrom cleaner sud-
denly starting.
Disconnect electrical supply.
To access the light bulb, remove the screw
which secures the light lens to the vacuum.
Remove the lens.
Screw Push Here
To Remove
Remove the light bulb by pushing the bulb in
while turning counterclockwise to release
from the slot. Pull the light bulb straight out.
\
Do not use e bulb rated over 130 V
AC-15 W. Duringextended use, heat
from the bulb could overheat surround-
ing plastic parts.
To replace the light bulb, carefully insert and
turn clockwise to fit securely into slot.
NOTE: See Parts and Features for Bulb
number.
I
CAUTION
Do not plug in or turn on until corn-
pletely reassembled.
Position the light lens back on the vacuum.
Replace the light lens screw.
20