Uline H-2619 Manual De Instrucciones página 2

6. Push cartridge down until it is pressed against the
steel stopper. (See Figure 7)
Figure 7
7. Pull the lip of the shoe cover out, extending both
sides and pull it forward until it connects to the
locking mechanism. It is now properly loaded and
ready for use. (See Figure 8)
PUTTING SHOE COVERS ON
1. Step in heel first, keeping elastic level with top of
shoe. (See Figure 9)
NOTE: Do not press down to the floor with your
heel, or at all. Keep shoe 3-4" above, and
parallel to the ground.
Figure 9
PAGE 2 OF 6
INSTRUCTIONS CONTINUED
2. Slowly pull back until cover stretches beyond tip
3. Pull back until shoe cover is released. (See Figure 11)
Steel Stopper
4. Repeat on other foot.
Figure 8
1-800-295-5510
uline.com
of shoe. Then tilt toe down below the elastic of the
shoe cover. (See Figure 10)
Figure 10
Figure 11
0421 IH-2619