marked on the heater. Any external power supply used
with this product must comply with relevant regulations
and standards applicable in the country of intended use.
MAINTENCE AND CLEANING
• Turn the appliance off and unplug it from the socket before cleaning or carry out
any type of maintenance.
• Clean the heater surface with a cloth slightly moistened with a solution of water
and mild detergent. Dry the surface thoroughly with a soft dry cloth before turn the
heater on.
• Clean the dust of the motor unit with a soft, dry cloth. Do not allow water and other
liquids to drip on or into the heater housing.
• Do not use solvents (cleaning products, alkaline products, benzene, alcohol, etc) as
they may cause distortion, discoloration or damage to the device.
• Regular cleaning is suggested to avoid dirt accumulation that may result in me-
chanical failure.
STORAGE
Please turn off and unplug the appliance when not in use.
When not in use for a long period of time, store the device away from heat, humidity,
and direct sunlight. To prevent dust and dirt build-up, please use the old packaging
to repack the device.
9
EN