Westmark 1291 2280 Manual De Instrucciones página 5

timer. To select the desired function set the controller at
the back of the device to TIMER for the timer function
or COOK for the thermometer function. The keys on the
front display the timer reading above the central separa-
ting line and the thermometer reading below.
Timer
Switch the controller on the reverse to the TIMER
function.
The display will indicate minutes and seconds.
Use the MIN and SEC buttons to set the desired time.
For start/stop press the S/S button.
A tone will signal the end of the set time which you can
switch off using the S/S button.
To reset the timer to ‚0' press MIN & SEC simultaneously.
(Tip: You can also use the timer without selecting a
particular time span. Simply press the Start/Stop button
to start the time.)
Thermometer
Switch the controller on the reverse of the thermometer
to COOK.
Insert the measuring wire into the side of the thermo-
meter.
Wire and probe are heat resistant up to max. 250° C.
The display indicates the temperature in both celsius and
fahrenheit. Press C/F to select the desired reading.
The display shows two temperature readings.