Using Your Car Kit - Amazon Basics B00K6L5EX6 Manual Del Usuario

Using your car kit

Pairing your receiver and a device
1. Press the function
turn on your receiver. The LED lights red
and you hear a tone.
2. Press and hold the function
for about 4 seconds to enter pairing
mode. The LED slowly blinks red and
you hear a tone.
3. On your device, locate your Bluetooth
settings and turn on Bluetooth.
4. In Bluetooth Settings, scan for devices if
necessary, then select Amazon_Carkit
from the device's list. The LED stops
blinking and lights blue, and you hear a
tone. Your device and receiver are
paired and ready to use.
Note: To turn off your receiver, press and
hold the function
seconds. The LED quickly flashes red 10
times, you hear a tone, and your receiver
turns off.
8
button once to
button for about 7
button