Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To Replace Bulb:
Caution: Before replacing the bulbs, always turn mirror off
and allow it to cool for at least 5 minutes.
• Remove the two screws on the side of the mirror with a
Phillips screwdriver (Fig. 1).
• Take off the mirror casing by gently pulling apart at
the seam.
• Unscrew light bulbs and replace with a new ones. For
your convenience, three replacement bulbs are included.
• Replace the mirror casing and line up the screw holes.
Screw back into place.
Maintenance
To Store
You may leave the mirror on display or you can store it in its
box or a cool, dry place.
• If you choose to store it, NEVER leave the mirror in a
position where it can reflect direct sunlight. This may
cause a fire.
• Allow to cool to room temperature before storing.
• Do not wrap cord around the mirror.
To Clean
Always unplug before cleaning the mirror. Never use
liquids or abrasive cleaners to clean, use only a damp
cloth with a mild cleanser.
• Clean the mirror with only a commercial glass cleaner
or water. Do not submerge the mirror or use excessive
water while cleaning.
• Do not plug mirror in until it is completely dry.
6
Unscrew to
replace bulbs
Replacement Bulbs
Mirror
Casing
Built-in Outlet
AC Adaptor Receptacle
X
Battery Compartment
Time Mode
TIME MODE
SET
Time Set
X
7
Figure 1
Figure 2
Figure 3
PM Indicator
Publicidad
Tabla de contenido
