General Servicing; Cleaning And Maintenance; Scale Removal - Spinel PINOCCHIO C Manual De Instrucciones

TROUBLESHOOTING
The machine may not work because:
the plug has not been inserted into the socket;
the ON/OFF switch has not been pressed;
there is no water in the tank;
the filters are clogged.
The cause of machine failure while preparing beverages may be:
the pod holder is not properly closed;
an exhausted pod is being used (the pods are for single use only);
If the cause of the failure does not correspond to those listed above, it is necessary to contact one
of our service centers.

GENERAL SERVICING

POWER CABLE
Regularly check the power cable. If it is worn or damaged, it should be replaced by authorized
personnel.

CLEANING AND MAINTENANCE

For the correct use of the machine and a high-quality coffee, it is highly recommended to regularly
clean the machine. These operations have to be done when the machine is cold and unplugged
from the power supply.
DRIP TRAY CLEANING:
Empty the tray daily and wash with warm water.
EXTERNAL CASE and CUP RACK
They should be wiped clean using a cloth soaked in specific mild detergent and warm water.
WARNING: only carry out this operation when the machine is cold

SCALE REMOVAL

The scale formation is a natural consequence of machine use. We recommend removing scale
regularly (as soon as it appears inside the water tube)) in order to avoid malfunctions that are not
covered by the warranty. Only use products for descaling coffee machines and follow the
instructions on the package of the product. Do not use vinegar, lye, salt, or formic acid because
they may damage the machine.
WARNING: Spinel S.r.l. does not acknowledge any failure to remove scale regularly.
Spinel S.r.l. 15