Carry the hedge trimmer by the handle with the cutter blade stopped. When
transporting or storing the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce possible personal injury from the
cutter blades.
Hold the power tool by insulated gripping surfaces only, because the cutter
blade may contact hidden wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
Keep cable away from cutting area. During operating the cable may be hidden in
shrubs and can be accidentally cut by the blade.
Use both hands when operating the hedge trimmer. Using one hand could cause
loss of control and result in serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
If the hedge trimmer should start to vibrate abnormally or become noisy, stop
the motor and check immediately for the cause. Abnormal noise is generally a
warning of trouble.
Replace the blade if it is bent or cracked. An unbalanced blade causes vibration
that could damage the motor drive unit or cause personal injury.
Keep all fasteners tight to be sure the hedge trimmer is in safe
working condition.
Make sure all proper guards and other safety devices are properly and
securely attached before using this product.
Do not charge the battery pack in rain, or in wet locations.
Use only with the battery pack and charger listed below.
BATTERY
BAX1501
Do not dispose of the battery in a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
10
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500
CHARGER
CHX5500