Package Inspection; Unpacking The Ups - Tripp-Lite S3MT-Serie Manual Del Propietário

3. Installation

3.2 Package Inspection

1. Don't lean the transformer cabinet when removing it from the packaging.
2. Check the appearance to see if the transformer cabinet was damaged during transport. Do not power on the transformer
cabinet if any damage is found. Contact the dealer immediately.
3. Check the accessories against the packing list and contact the dealer in case of missing parts.

3.3 Unpacking the UPS

1. Hold the sliding plate steady. Cut and remove the binding
straps (Figure 3-2).
Figure 3-2
2. Remove the plastic bag and the outer carton (Figure 3-3).
7
Figure 3-3