Software Installation; System Requirements - Manhattan 150385 Guia De Inicio Rapido

SATA 6Gb/s ExpressCard/34 • User Manual
Thank you for purchasing the MANHATTAN
Model 150385. For specifications, go to www.manhattan-products.com.

Software Installation

1. Insert the SATA 6Gb/s ExpressCard/34 into an available slot.
2. When the Found New Hardware Wizard screen displays with "PCI
Device" listed, make sure the included driver CD is in the CD-ROM/
DVD drive, then select "Install from a list or specific location
(Advanced)" and click "Next."
3. Select "Search for the best driver in these locations," and check the
"Include this location in the search" option. (Uncheck the other
boxes.)
4. Enter "E:\" (if your CD-ROM/DVD is E:\), then click "Browse."
5. Check a location; e.g., "E:\ SATA6G_M9128." Click "Open," then
"OK."
6. When the wizard indicates that it found a driver for the device,
click "Next."
7. If the Hardware Installation screen appears, click "Continue
Anyway."
8. The wizard will now copy the required files to the system and start
the driver. When the Installation Complete screen displays, click
"Finish" to exit the wizard.
Installation Verification
1. Right-click on My Computer and go to Properties. Left-click on the
Hardware tab, then click "Device Manager."
2. Double-click on "SCSI and RAID Controllers." If there is no yellow
exlamation point (!) or question mark (?) displayed in front of
"Marvell AHCI SATA Controller," the driver is installed correctly.

System Requirements

• Windows XP/Vista/7/Server 2003/2008 (32- and 64-bit)
• Available Express Card slot
• CD-ROM drive
2
ENGLISH
SATA 6Gb/s ExpressCard/34,
®
English