REVAMP Professional PROGLOSS STEAMCARE Manual Del Usuario página 2

FEATURES
1
1. Floating ceramic plates
2. Steam apertures
3. Water tank
4. Water tank lock/unlock lever
5. Plates lock/unlock lever
STEAMCARE
The Professional Steam Ionic Technology of your new
SteamCare straightener will give you faster and smoother
results while reducing colour fade. The clever "Lock In
moisture" system comes with 3 settings – no steam/ low
steam/ high steam for versatility in styling whatever your hair
type or length.
The advanced intelligent heat control - ranging from 150ºC to
230ºC - that continuously regulates the temperature of the
ceramic plates will leave your hair with minimum damage and give you maximum control
while styling.
PROGLOSS™ SUPER SMOOTH OILS
Every product in the Revamp haircare range is infused with PROGLOSS™ SUPER SMOOTH
OILS - enriched with Argan, Keratin and Coconut for ultimate smoothness and shine.
INSTRUCTIONS FOR USE
• Before use, ensure the hair is clean, dry and tangle-free.
• For extra protection, apply a heat protection spray.
• Section the hair prior to styling. Style the lower layers first.
• Plug the product into a 220-240V mains power supply.
• Fill the water tank of your straightener. Unlock the water
tank using the lock/unlock mechanism on the top of the
straightener (A). After removing the tank (B), lift the black
silicon tab and fill the tank with water. Replace the tab after
filling the tank and re-attach the tank onto the unit.
• IMPORTANT: Filtered water should be used to fill the water
tank within your SteamCare straightener.
• Select your chosen settings by turning the dial (C) on the
bottom of the straightener: no steam/ low steam/ high
steam according to your hair type or length.
- For thinner, shorter hair we recommend the "low steam"
setting
- For thicker, longer hair we recommend the "high steam"
setting
• Press the on/off button to switch on
temperature when the product switches on is 210°C.
3
6
9
2
6. Temperature control button
7. Power button
8. Non-slip heat proof silicone mat
9. Lock in moisture
. The default
4 5
7
8