W
ORKING
1
2
3
4
5
1. Make sure that the device is used in an appropriate
environment, keep machine away from kids.
2. Power off the machine when finish using.
3. Please be careful not to touch the heating plate when it is heated.
S
Connect power cord,Turn on the switch.
Set desired time and temperature on the
controller.
Wait until the machine temperature
reaches the set temperature.
When temperature reached, put your material,
and press platen, Press countdown button.
When times up, the machine beeps to let you
know times up, this time you can lift up handle
and platen to take of your material out
TEPS: